PART NUMBER SML-LX0201NWD-TR REV -- 0.36 0.1 0.014 0.004 CATHODE CATHODE ELECTRO-OPTICAL CHARACTERISTIC TA=25 0.13 0.005 SIDE MARK PARAMETER MIN TYP MAX UNITS TEST COND X - 0.300 - PEAK WAELENGHT - If=2mA Y - 0.296 - FORWARD VOLTAGE - 2.8 3.2 Vf If=2mA REVERSE VOLTAGE - - 5 Vr Ir=100uA LUMINOUS INTENSITY - 60 - mcd If=2mA VIEWING ANGLE - 110 - 2x theta1/2 - 0.33 0.1 0.013 0.004 0.38 0.1 0.015 0.004 EMITTED COLOR WHITE EPOXY LENS FINISH YELLOW POLARITY RECOMMENDED SOLDER PAD LAYOUT ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 60 mA CATHODE FORWARD CURRENT 5 mA POWER DISIPATION 16 mW STORAGE TEMPERATURE -40~+100 OPERATING TEMPERATURE -40~+85 *t<10us ANODE CAUTIONMOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 2a STANDARDS CAUTIONSTATIC DEVICE FOLLOW PROPER E.S.D. HANDLING PROCEDURES WHEN WORKING WITH THIS PART. 0.33 0.013 +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 0.65(L)*0.38(W)*0.36(H)mm, SURFACE MOUNT TOP VIEW LED, lnGaN NEUTRAL WHITE, YELLOW LENS, TAPE & REEL DATE 2017.05.25 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY R.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 0.65 0.1 0.026 0.004 0.25 0.010 0.40 0.016 0.40 0.016 0.25 0.1 0.01 0.004 0.20 0.1 0.008 0.004 0.20 0.1 0.008 0.004PART NUMBER SML-LX0201NWD-TR REV -- PROFILE CARRIER TAPE DIMENSION +0.1 1.50 0.0 10 SEC. MAX. 260 C MAX. 2 0.05 4 0.1 A 4 C/S MAX. CATHODE 6 C/S MAX. CATHODE 200 MARK PRE-HEATING 180~200 C 180 60 SEC. MAX. ABOVE 220 C B B 120 SEC. MAX. ANODE A 0.41 0.03 4 C/S MAX. SECTION A-A 0.47 0.03 TIME SECTION B-B +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 0.65(L)*0.38(W)*0.36(H)mm, SURFACE MOUNT TOP VIEW LED, lnGaN NEUTRAL WHITE, YELLOW LENS, TAPE & REEL DATE 2017.05.25 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY R.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.05 1.75 0.1 +0.3 8.0 -0.1 0.74 0.03