PART NUMBER SML-LX0603GW-TR REV I REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10BRDR. & REDRAWN. 09.30.98 B E.C.N. 10644. 07.18.00 C E.C.N. 10933. CATHODE 12.03.02 D E.C.N. 10967. 03.14.03 MARK E E.C.N. 11148. 12.06.04 F E.C.N. 11508. 05.19.08 G E.C.N. 10BRDR. & REDRAWN. 09.12.13 POLARITY H ECN-Lumex201800005 01.29.18 I ECN-Lumex201900133 10.14.19 1 2 ELECTRO-OPTICAL CHARACTERISTIC TA=25 PARAMETER MIN TYP MAX UNITS TEST COND 1.600 0.063 PEAK WAVELENGTH - 565 - nm If=20mA FORWARD VOLTAGE - 2.2 2.4 Vf If=20mA REVERSE CURRENT - - 10 uA VR=5V LUMINOUS INTENSITY - 11 - mcd If=20mA VIEWING ANGLE - 125 - 2x theta1/2 - 1.000 0.039 EMITTED COLOR GREEN EPOXY LENS FINISH MILKY WHITE DIFFUSED ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS RECOMMENDED SOLDER PAD LAYOUT PEAK FORWARD CURRENT* 40 mA FORWARD CURRENT 20 mA REVERSE VOLTAGE 5 V 2- 0.800 POWER DISSIPATION 48 mW STORAGE TEMPERATURE -40 TO +100 OPERATING TEMPERATURE -40 TO +85 *t<10us 1 2 2- 0.450 0.018 STATIC DEVICE FOLLOW PROPER 0.700 MOISTURE SENSITIVE DEVICE 0.700 0.028 E.S.D. HANDLING PROCEDURES PER JEDEC LEVEL 2a STANDARDS WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. DATE 2019.10.14 DRAWN BYC.S. 1.6(L)*0.8(W)*0.6(H)mm, PCB CHIP, SURFACE MOUNT LED, 565nm GREEN LED, MILKY WHITE DIFFUSED LENS. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 0.600 0.024 0.280 0.011 0.800 0.031 2- 0.800 PART NUMBER SML-LX0603GW-TR REV I PROFILE CARRIER TAPE DIMENSION 260 C MAX. 2 0.05 4 0.1 +0.1 10S. MAX. 1.50 0.0 A 4 C/S MAX. 2 6 C/S MAX. PRE-HEATING B B 180~200 C ABOVE 220 C 120 SEC. MAX. 60 SEC. MAX. A 1 4 0.1 0.85 0.05 4 C/S MAX. SECTION A-A TIME 0.88 0.05 NOTE: SECTION B-B 1. PACKAGE: 4000 PCS/REEL +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. DATE 2019.10.14 DRAWN BYC.S. 1.6(L)*0.8(W)*0.6(H)mm, PCB CHIP, SURFACE MOUNT LED, 565nm GREEN LED, MILKY WHITE DIFFUSED LENS. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.05 1.75 0.1 8.0 0.1 1.85 0.05