PART NUMBER SML-LX0603SYW-TR REV H REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10BRDR. & REDRAWN. 09.30.98 B E.C.N. 10644. 07.18.00 C E.C.N. 10933. CATHODE 13.03.02 D E.C.N. 10967. 03.14.03 MARK E E.C.N. 11148. 12.06.04 F E.C.N. 11508. 05.27.08 G E.C.N. 10BRDR. 10.17.11 POLARITY H ECN-Lumex201700132 12.25.17 I ECN-Lumex201900133 11.14.19 ELECTRO-OPTICAL CHARACTERISTIC TA=25 PARAMETER MIN TYP MAX UNITS TEST COND 1 2 PEAK WAVELENGTH - 590 - nm If=20mA 1.60 0.063 FORWARD VOLTAGE - 2.0 2.4 Vf If=20mA REVERSE CURRENT - - 10 uA VR=5V LUMINOUS INTENSITY - 71 - mcd If=20mA VIEWING ANGLE - 128 - 2x theta1/2 - EMITTED COLOR YELLOW 1.00 0.039 EPOXY LENS FINISH MILKY WHITE DIFFUSED ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 40 mA FORWARD CURRENT 20 mA RECOMMENDED SOLDER PAD LAYOUT REVERSE VOLTAGE 5 V POWER DISSIPATION 48 mW 2- 0.800 STORAGE TEMPERATURE -40 TO +100 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE 3 SEC. MAX 260 *t<10us 1 2 STATIC DEVICE FOLLOW PROPER 2- 0.450 0.018 MOISTURE SENSITIVE DEVICE 0.700 E.S.D. HANDLING PROCEDURES 0.700 0.028 PER JEDEC LEVEL 2a STANDARDS WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 1.6(L)*0.8(W)*0.6(H)mm, PCB CHIP, SURFACE MOUNT TOP VIEW LED, 590nm AlInGaP YELLOW, MILKY WHITE DIFFUSED LENS, TAPE & REEL. DATE 2019.11.14 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 0.60 0.024 0.280 0.011 0.80 0.031 2- 0.800 PART NUMBER SML-LX0603SYW-TR REV H PROFILE CARRIER TAPE DIMENSION 260 C MAX. 2 0.05 4 0.1 +0.1 10S. MAX. 1.50 0.0 A 4 C/S MAX. 2 6 C/S MAX. PRE-HEATING B B 180~200 C ABOVE 220 C 120 SEC. MAX. 60 SEC. MAX. A 1 4 0.1 0.85 0.05 4 C/S MAX. SECTION A-A TIME 0.88 0.05 NOTE: SECTION B-B 1. PACKAGE: 4000 PCS/REEL +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 1.6(L)*0.8(W)*0.6(H)mm, PCB CHIP, SURFACE MOUNT TOP VIEW LED, 590nm AlInGaP YELLOW, MILKY WHITE DIFFUSED LENS, TAPE & REEL. DATE 2019.11.14 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.05 1.75 0.1 8.0 0.1 1.85 0.05