PART NUMBER SML-LX0805SUGC-TR REV H REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10862. 05.09.02 CATHODE B E.C.N. 10967. 03.14.02 MARK C E.C.N. 11248. 08.08.05 D E.C.N. 11148. 09.26.07 E E.C.N. 11508. 03.06.09 F E.C.N. 10BRDR & REDRAWN. 05.07.12 G ECN-Lumex201800105 06.12.18 H ECN-Lumex201800139 09.19.18 POLARITY 2.00 0.079 ELECTRO-OPTICAL CHARACTERISTIC TA=25 2 1 PARAMETER MIN TYP MAX UNITS TEST COND PEAK WAVELENGTH - 574 - nm If=20mA FORWARD VOLTAGE - 2.0 2.4 Vf If=20mA REVERSE VOLTAGE - - 10 uA VR=5V LUMINOUS INTENSITY - 23 - mcd If=20mA 1.40 0.055 VIEWING ANGLE - 140 - 2x theta1/2 - EMITTED COLOR GREEN EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS RECOMMENDED SOLDER PAD LAYOUT PEAK FORWARD CURRENT* 60 mA FORWARD CURRENT 25 mA REVERSE VOLTAGE 5 V 2- 0.60 0.024 POWER DISSIPATION 60 mW STORAGE TEMPERATURE -40 TO +90 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE** 3 SEC. MAX 260 2 1 *t<10us **2.0mm FROM BODY. NOTE: 1.80 0.071 1. RoHS COMPLIANT. 2. COMPLIANCE WITH EU REACH. 3. COMPLIANCE Halogen Free . (Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm) 4. 3000 PCS/REEL. MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.0(L)*1.25(W)*1.0(H)mm, SURFACE MOUNT TOP VIEW LED, AlGaInP 574nm GREEN, WATER CLEAR LENS, TAPE & REEL DATE 2018.06.11 DRAWN BYC.C. CAROL STREAM, IL 60188 **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE** PAGE 1 OF 2 CHKD BY E.C. PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.00 0.039 0.46 0.018 1.25 0.049 1.25 0.049PART NUMBER SML-LX0805SUGC-TR REV H PROFILE CARRIER TAPE DIMENSION 260 C MAX. ABOVE 255 C 10S. MAX. 1.55 0.05 2 0.1 4 0.1 0.25 0.1 30S MAX. 2 A 3 C/S MAX. 6 C/S MAX. B B PRE-HEATING 150~200 C ABOVE 217 C A 1 60~120 SEC. 60~150 SEC. MAX. 1.25 0.1 4 0.1 SECTION A-A 1.40 0.1 TIME SECTION B-B +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.0(L)*1.25(W)*1.0(H)mm, SURFACE MOUNT TOP VIEW LED, AlGaInP 574nm GREEN, WATER CLEAR LENS, TAPE & REEL DATE 2018.06.11 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.05 1.75 0.1 +0.3 8.0 0.0 2.20 0.1