PART NUMBER SML-LX1610RGBW/A REV C REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 11508. 03.10.09 B ECN-Lumex201700017 05.24.17 C ECN-Lumex201700087 10.06.17 10.01 0.394 POLARITY ELECTRO-OPTICAL CHARACTERISTIC TA=25 4 PARAMETER MIN TYP MAX UNITS TEST COND R - 625 - If=300mA PEAK WAVELENGTH G - 525 - nm If=350mA B - 470 - R - 2.1 2.79 G R B FORWARD VOLTAGE G - 3.5 3.99 Vf If=350mA G - 3.5 3.99 1 2 3 10.01 0.394 REVERSE VOLTAGE - - 5 Vr Ir=100uA R - 35 - If=300mA 8.50 0.335 TOTAL FLUX G - 80 - lm If=350mA B - 30 - 4 VIEWING ANGLE - 110 - 2x theta1/2 - EMITTED COLOR RED / GREEN / BLUE EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT (R/G/B)* 350 / 500 / 500 mA FORWARD CURRENT (R/G/B) 300 / 350 / 350 mA POWER DISIPATION 3.5 W STORAGE TEMPERATURE -40 TO +85 1 2 3 OPERATING TEMPERATURE -40 TO +85 2- 2.54 0.100 SOLDERING TEMPERATURE** 3 SEC. MAX. 260 MOISTURE SENSITIVE DEVICE 5.08 0.200 *t<10us PER JEDEC LEVEL 4 STANDARDS **2.0mm FROM BODY STATIC DEVICE FOLLOW PROPER E.S.D. HANDLING PROCEDURES WHEN WORKING WITH THIS PART NOTE 1. RoHS COMPLIANT. 0.00 +DECIMAL PRECISION + *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION 425 N. GARY AVE. 10.0L*10.60W*3.30H, HIGH POWER LED, RGB LEDS, WATER CLEAR LENS. DATE 2017.10.06 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 5 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 10.60 0.417 3.30 0.130 5.25 0.207 8.50 0.335 1.27 0.050PART NUMBER SML-LX1610RGBW/A REV C PROFILE RECOMMENDED SOLDER PAD LAYOUT 10.70 0.1 260 C MAX. 10S. MAX. 4 C/S MAX. 6 C/S MAX. 200 C 180 C PRE-HEATING 180~200 C ABOVE 220 C 120 SEC. MAX. 60 SEC. MAX. 4 C/S MAX. 1.00 0.1 2- 2.54 0.1 TIME 0.00 +DECIMAL PRECISION + *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION 425 N. GARY AVE. 10.0L*10.60W*3.30H, HIGH POWER LED, RGB LEDS, WATER CLEAR LENS. DATE 2017.10.06 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 5 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 17.00 0.2 3.1 0.1 8.40 0.1