PART NUMBER SML-LX5050SIUPGUBC REV B REV E.C.N NUMBER AND REVISION COMMENTS DATE POLARITY A ECN-Lumex201700085 10.02.17 5.00 0.197 ECN-Lumex201900022 B 01.29.19 4.25 0.167 G 4 3 Z4 3 4 R ELECTRO-OPTICAL CHARACTERISTIC TA=25 5 2 PARAMETER MIN TYP MAX UNITS TEST COND Z4 5 2 R - 635 - B PEAK WAVELENGTH G - 515 - nm If=150mA 6 1 6 1 B - 455 - Z4 SLUG R - 2.3 2.8 7.40 0.291 FORWARD VOLTAGE G - 3.3 3.8 Vf If=150mA RECOMMENDED SOLDER PAD LAYOUT B - 3.3 3.8 10.00 0.394 REVERSE CURRENT (PER DIE) - - 85 mA -- R - 4000 - 6.20 0.244 SOLDER MASK LUMINOUS INTENSITY G - 9000 - mcd If=150mA B - 2300 - VIEWING ANGLE - 120 - 2x theta1/2 -- EMITTED COLOR RED / GREEN / BLUE EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT (R/G/B)* 300 / 300 /300 mA 6 1 3.00 0.118 FORWARD CURRENT (R/G/B) 150 / 150 / 150 mA POWER DISSIPATION (R/G/B) 420 / 570 / 570 mW 5 2 REVERSE VOLTAGE 5 V STORAGE TEMPERATURE -40 TO +85 4 3 OPERATING TEMPERATURE -40 TO +85 6- 2.20 0.087 *t<10us MOISTURE SENSITIVE DEVICE SLUG PER JEDEC LEVEL 3 STANDARDS STATIC DEVICE FOLLOW PROPER E.S.D. HANDLING PROCEDURES WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. DATE 2019.01.29 DRAWN BYC.S. 5(L)*5(W)*1.3(H)mm, SML W / REFLECTOR, AlGaInP 635nm RED / InGaN 515nm GREEN / InGaN 455nm BLUE, WATER CLEAR LENS, TAPE & REEL. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.30 0.051 5.00 0.197 4.25 0.167 0.30 0.012 0.80 0.031 6- 1.00 0.039 2- 3.20 0.126 14.20 0.559 2- 3.20 0.126 6- 1.00 0.039 4.00 0.157 2- 6.20 0.244PART NUMBER SML-LX5050SIUPGUBC REV B PROFILE CARRIER TAPE DIMENSION 2 0.1 4 0.1 0.318 0.1 1.5 0.1 260 C MAX. ABOVE 255 C 10S MAX. A 30S MAX. 3 C/S MAX. 3 2 1 6 C/S MAX. Z4 Z4 Z4 G R B B B PRE-HEATING 4 5 6 SLUG 150~200 C ABOVE 217 C 60~120 SEC. 60~150 SEC. A 1.9 0.1 1.5 TYP. 8 0.1 SECTION A-A 25 C 5.6 0.1 TIME SECTION B-B NOTE: 1. 500 PCS/REEL. +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. DATE 2019.01.29 DRAWN BYC.S. 5(L)*5(W)*1.3(H)mm, SML W / REFLECTOR, AlGaInP 635nm RED / InGaN 515nm GREEN / InGaN 455nm BLUE, WATER CLEAR LENS, TAPE & REEL. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 7.5 0.1 1.75 0.1 +0.3 16 -0.1 7.6 0.1