PART NUMBER SML-LXL1206GC-TR REV G REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10BRDR. & REDRAWN. 03.30.98 CATHODE B E.C.N. 10695. 01.08.01 MARK C E.C.N. 10967. 03.14.03 D E.C.N. 11148. 03.17.05 E E.C.N. 11508. 05.26.10 F E.C.N. 11665. 10.12.10 G ECN-Lumex201700080 09.27.17 A A ELECTRO-OPTICAL CHARACTERISTIC TA=25 POLARITY PARAMETER MIN TYP MAX UNITS TEST COND PEAK WAVELENGTH - 570 - nm If=20mA 3.00 0.118 FORWARD VOLTAGE - 2.0 2.4 Vf If=20mA CATHODE ANODE REVERSE CURRENT - - 10 uA VR=5V 2.00 0.079 LUMINOUS INTENSITY - 20 - mcd If=20mA 1.10 0.043 VIEWING ANGLE - 60 - 2x theta1/2 - R0.45 0.018 EMITTED COLOR YELLOW GREEN EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 60 mA RECOMMENDED SOLDER PAD LAYOUT SECTION A-A FORWARD CURRENT 30 mA REVERSE VOLTAGE 5 V 2.50 0.098 POWER DISIPATION 100 mW STORAGE TEMPERATURE -40 TO +85 OPERATING TEMPERATURE -30 TO +85 *t<10us CATHODE ANODE NOTE: 1. RoHS COMPLIANT. 2. COMPLIANCE WITH EU REACH. 3. COMPLIANCE Halogen Free . 2- 0.90 0.035 (Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm) MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS 0.00 +DECIMAL PRECISION + *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION 425 N. GARY AVE. 3(L)*1.5(W)*1.5(H)mm, PCB SML WITH LENS, 570nm YELLOW GREEN LED, WATER CLEAR LENS, TAPE & REEL DATE 2017.09.27 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.50 0.059 0.46 0.018 1.50 0.059 2- 1.30 0.051PART NUMBER SML-LXL1206GC-TR REV G PROFILE CARRIER TAPE DIMENSION 260 C MAX. 4.0 0.1 ABOVE 255 C 10S. MAX. 2.0 0.05 0.23 0.05 30S MAX. 1.50 0.1 A 3 C/S MAX. CATHODE 6 C/S MAX. PRE-HEATING B B 150~200 C ABOVE 217 C A ANODE 60~120 SEC. 60~150 SEC. MAX. 4.0 0.1 1.60 0.1 SECTION A-A 1.65 0.1 TIME SECTION B-B 0.00 +DECIMAL PRECISION + *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION 425 N. GARY AVE. 3(L)*1.5(W)*1.5(H)mm, PCB SML WITH LENS, 570nm YELLOW GREEN LED, WATER CLEAR LENS, TAPE & REEL DATE 2017.09.27 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.05 8.0 0.2 3.25 0.1