PART NUMBER SML-LXR0804RGBC-TR REV A DATE REV E.C.N. NUMBER AND REVISION COMMENTS A ECN-Lumex201900073 06.11.19 2.00 0.079 ELECTRO-OPTICAL CHARACTERISTIC TA=25 PARAMETER MIN TYP MAX UNITS TEST COND 2 3 POLARITY R - 630 - PEAK WAVELENGTH G - 525 - nm If=20mA 1 B - 475 - R - 2.0 2.4 1 4 FORWARD VOLTAGE G - 2.8 3.4 Vf If=20mA B - 2.8 3.4 R - - 1 RED GREEN BLUE REVERSE CURRENT G - - 1 uA VR=5V B - - 1 R - 420 - LUMINOUS INTENSITY G - 750 - mcd If=20mA B - 130 - 4 3 2 VIEWING ANGLE 105 2x theta1/2 - EMITTED COLOR RED / GREEN / BLUE EPOXY LENS FINISH WATER CLEAR RECOMMENDED SOLDER PAD LAYOUT 2- 0.57 0.022 ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS 2- 0.22 0.009 PEAK FORWARD CURRENT (R/G/B)* 40 / 30 / 30 mA FORWARD CURRENT (R/G/B) 20 / 20 / 20 mA 2- 0.32 0.013 REVERSE VOLTAGE 5 V POWER DISSIPATION (R/G/B) 48 / 68 / 68 mW 0.23 0.009 1 4 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE 3 SEC. MAX 260 *t<10us 2 3 2 1 4 3 STATIC DEVICE FOLLOW PROPER MOISTURE SENSITIVE DEVICE E.S.D. HANDLING PROCEDURES PER JEDEC LEVEL 4 STANDARDS WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.0(L)*1.4(W)*0.9(H)mm, RIGHT ANGLE SURFACE MOUNT LED, AllnGaP 630nm RED / InGaN 525nm GREEN / InGaN 475nm BLUE LED, WATER CLEAR LENS, TAPE & REEL, COMMON ANODE. DATE 2019.6.11 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.40 0.055 0.50 0.020 0.90 0.035 2- 0.57 0.022 2- 0.42 0.017PART NUMBER SML-LXR0804RGBC-TR REV A PROFILE CARRIER TAPE DIMENSION 2.00 0.079 +0.10 0.254 0.013 1.50 0.00 ANODE SIDE 260 C MAX. A 10S MAX. 4 C/S MAX. 6 C/S MAX. B B PRE-HEATING 180~200 C ABOVE 220 C A 120 SEC. MAX. 60 SEC. MAX. 1.15 0.10 4.00 4 C/S MAX. SECTION A-A TIME 1.5 0.1 NOTE: SECTION B-B 1. 4000 PCS/REEL +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.0(L)*1.4(W)*0.9(H)mm, RIGHT ANGLE SURFACE MOUNT LED, AllnGaP 630nm RED / InGaN 525nm GREEN / InGaN 475nm BLUE LED, WATER CLEAR LENS, TAPE & REEL, COMMON ANODE. DATE 2019.6.11 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.50 0.05 1.75 0.10 +0.30 8.00 -0.10 2.25 0.10