PART NUMBER SML-LXR1003RGBC-05 REV B REV E.C.N. NUMBER AND REVISION COMMENTS DATE ECN-Lumex201900072 A 05.27.19 04.20.20 B ECN-Lumex202000025 ANODE MARK 1 4 ELECTRO-OPTICAL CHARACTERISTIC TA=25 POLARITY PARAMETER MIN TYP MAX UNITS TEST COND R - 630 - 2 3 PEAK WAVELENGTH G - 520 - nm If=5mA B - 470 - 4 R - 2.0 2.4 2.70 0.106 FORWARD VOLTAGE G - 2.8 3.2 Vf If=5mA B - 2.8 3.2 R - - 10 RED GREEN BLUE REVERSE CURRENT G - - 10 uA VR=5V B - - 10 R - 36 - LUMINOUS INTENSITY G - 127 - mcd If=5mA B - 36 - 1 3 2 VIEWING ANGLE - 130 - 2x theta1/2 - EMITTED COLOR RED / GREEN / BLUE EPOXY LENS FINISH WATER CLEAR RECOMMENDED SOLDER PAD LAYOUT ABSOLUTE MAXIMUM RATINGS TA=25 2- 0.70 0.028 PARAMETER MAX UNITS 2- 0.35 0.014 PEAK FORWARD CURRENT (R/G/B)* 40 / 60 / 60 mA FORWARD CURRENT (R/G/B) 20 / 20 / 20 mA 2- 0.55 0.022 REVERSE VOLTAGE 5 V 0.30 0.012 POWER DISSIPATION (R/G/B) 48 / 64 / 64 mW 2 3 STORAGE TEMPERATURE -40 TO +100 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE 3 SEC. MAX 260 1 4 *t<10us 1 4 2 3 STATIC DEVICE FOLLOW PROPER MOISTURE SENSITIVE DEVICE E.S.D. HANDLING PROCEDURES PER JEDEC LEVEL 4 STANDARDS WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.7(L)*0.8(W)*1.35(H)mm, SURFACE MOUNT LED, 630nm RED / 520nm GREEN / 470nm BLUE LED, WATER CLEAR LENS, TAPE & REEL, COMMON ANODE. DATE 2019.05.27 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.35 0.053 0.80 0.031 2- 0.90 0.035 2- 0.70 0.028 0.15 0.006PART NUMBER SML-LXR1003RGBC-05 REV B PROFILE CARRIER TAPE DIMENSION +0.1 260 C MAX. 2.0 0.05 4.0 0.1 1.5 0.0 0.23 0.02 10S MAX. A 4 C/S MAX. 6 C/S MAX. B B PRE-HEATING 180~200 C ABOVE 220 C 120 SEC. MAX. 60 SEC. MAX. 1.0 0.1 A 4.0 0.1 ANODE SIDE 4 C/S MAX. SECTION A-A 1.55 0.10 TIME NOTE: SECTION B-B 1. 3000 PCS/REEL +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2.7(L)*0.8(W)*1.35(H)mm, SURFACE MOUNT LED, 630nm RED / 520nm GREEN / 470nm BLUE LED, WATER CLEAR LENS, TAPE & REEL, COMMON ANODE. DATE 2019.05.27 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.50 0.1 1.75 0.1 +0.30 8.00 -0.10 2.9 0.1