PART NUMBER SML-LXR851SGC-TR REV C REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10967. 05.16.02 B E.C.N. 11710/10BRDR. & REDRAWN. 09.07.04 C ECN-Lumex201800162 10.22.18 2 1 ELECTRO-OPTICAL CHARACTERISTIC TA=25 3.00 0.118 PARAMETER MIN TYP MAX UNITS TEST COND POLARITY PEAK WAVELENGTH - 570 - nm If=20mA FORWARD VOLTAGE - 2.1 2.4 Vf If=20mA REVERSE CURRENT - - 10 uA VR=5V LUMINOUS INTENSITY - 16 - mcd If=20mA VIEWING ANGLE - 120 - 2x theta1/2 - 2 1 2.00 0.079 EMITTED COLOR GREEN EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT * 60 mA RECOMMENDED SOLDER PAD LAYOUT FORWARD CURRENT 30 mA REVERSE VOLTAGE 5 V POWER DISSIPATION 72 mW STORAGE TEMPERATURE -40 TO +90 2.83 0.111 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE 3 SEC. MAX 260 *t<10us 2 1 2- 0.63 0.025 CATHODE MARK 1.07 0.042 1.42 0.056 MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3.0(L)*1.0(W)*2.0(H)mm, SURFACE MOUNT SIDE VIEW LED, GaP 570nm GREEN LED, WATER CLEAR LENS, TAPE & REEL. DATE 2018.10.22 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.000 0.039 1.000 0.039 2.00 0.079 2- 1.41 0.056 0.43 0.017 0.49 0.019PART NUMBER SML-LXR851SGC-TR REV C PROFILE CARRIER TAPE DIMENSION 2 0.1 4 0.1 1.5 0.1 ABOVE 255 C 260 C MAX. 0.23 0.1 1.00 0.05 30S. MAX. 10S MAX. A 3 C/S MAX. 6 C/S MAX. 2 1 B B PRE-HEATING 150~200 C ABOVE 217 C A 60~120 SEC. 60~150 SEC. 1.27 0.1 4.0 0.1 SECTION A-A SECTION B-B TIME NOTE: 1. 2000 PCS/REEL +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3.0(L)*1.0(W)*2.0(H)mm, SURFACE MOUNT SIDE VIEW LED, GaP 570nm GREEN LED, WATER CLEAR LENS, TAPE & REEL. DATE 2018.10.22 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.50 0.1 1.75 0.1 8.00 0.2 3.25 0.1