PART NUMBER SSL-LXA228IC-TR31 REV F REV E.C.N. NUMBER AND REVISION COMMENTS DATE CHG D SOLDER OPER. & STOR. SPECS. 08.03.94 A CHG D WHERE NOTED. 11.29.94 B 2.50 0.098 E.C.N 10695. &10BRDR. 01.05.01 C E.C.N 10762. 06.18.01 D E.C.N 11148. 05.18.01 E ECN-Lumex201900025 02.12.19 2 1 F ELECTRO-OPTICAL CHARACTERISTIC TA=25 POLARITY PARAMETER MIN TYP MAX UNITS TEST COND 1.90 0.075 PEAK WAVELENGTH - 640 - nm If=20mA FORWARD VOLTAGE - 2.0 2.6 Vf If=20mA 2 1 REVERSE VOLTAGE - - 10 uA VR=5V 5.80 0.228 LUMINOUS INTENSITY - 80 - mcd If=20mA VIEWING ANGLE - 25 - 2x theta1/2 - EMITTED COLOR RED EPOXY LENS FINISH WATER CLEAR 2 1 ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 160 mA FORWARD CURRENT 30 mA POWER DISSIPATION 78 mW 2.32 0.091 REVERSE VOLTAGE 5 V 4.30 0.169 STORAGE TEMPERATURE -40 TO +100 RECOMMENDED SOLDER PAD LAYOUT OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE** 3 SEC. MAX. 260 5.29 0.208 *t<10us ** 2.0mm FROM BODY. 2 1 MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 4 STANDARDS 2- 1.01 0.040 +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 5.8(L)*2.0(W)*2.7(H)mm, GaN/SiC 640nm RED, AXIAL LED, WATER CLEAR LENS, Z BEND, TAPE AND REEL. DATE 2019.02.12 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 2.70 0.106 0.55 0.022 1.48 0.058 1.40 0.055 0.75 0.030 0.15 0.006 2.0 0.079 0.45 0.018 2- 0.70 0.028PART NUMBER SSL-LXA228IC-TR31 REV F PROFILE CARRIER TAPE DIMENSION +0.1 260 C MAX. ABOVE 255 C 2.0 0.05 4 0.1 1.5 0.0 10S MAX. 0.36 0.02 30S MAX. A 2 3 C/S MAX. 6 C/S MAX. PRE-HEATING 150~200 C ABOVE 217 C 60~120 SEC. 60~150 SEC. 1 A 4.0 0.1 3.15 0.1 PUSH PIN THROUGH TIME SECTION A-A HOLE NOTE: 1. 1,000 PCS/REEL. +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 5.8(L)*2.0(W)*2.7(H)mm, GaN/SiC 640nm RED, AXIAL LED, WATER CLEAR LENS, Z BEND, TAPE AND REEL. DATE 2019.02.12 DRAWN BYC.S. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 5.5 0.05 1.75 0.10 +0.3 12.0 -0.1