DK-236 Series Product Brief Development Kit Product Brief DK-236 (Preliminary) Overview Main Features The DK-236 development kits for Luminus devices are Can be operated either in pulsed or continuous comprehensive solutions designed specifically to allow waveform (CW) modes via opto-isolated PWM for evaluation of products in minutes. The kits include control high current, low voltage drivers optimized for Luminus LEDs and an efficient thermal management Static current control via on board current adjustment infrastructure to ensure the devices can be operated at their optimum point, whether it is for maximum Pulse width modulation input supports pulsed mode brightness, maximum efficiency or anywhere in- operation with duty cycles with a minimum pulse between. This plug and play solution can easily be width of 8s connected to standard laboratory equipment through standard connectors and allows system designers to Dynamic PWM control interface allows drive pulse save weeks in their development cycles. via 5V min to 8V max Pk-Pk utilizing active low (LED output is ON when signal is low) Fast driver switching frequency (420KHz) Key Characteristics Compatibility with all core board Low Voltage High Device and circuit parameters reading through test Current Devices with optimization above 30A ports, including: Forward voltage, V F Output switching response below 2s Forward current, I F Driver board supplies max currents of up to 36A (PWM) and 30A (DC) Device temperature monitoring through thermistor connection (LEDs with built-in thermistor only). Included with blower style fan driven by board suitable for power dissipation up to 125W Rise and fall times under 4s based on output 18V output voltage capability supports Luminus latest Specialty high voltage LEDs or driving discrete LEDs in series (up to 150W maximum) 1 PDB-002846 Rev 01 2020 Luminus Devices, Inc. - All Rights Reserved DK-236 Series Product Brief Development Kit Contents User Required Equipment 1 comprehensive driver board capable of providing Standard 12V/24V power supply (Recommendation up to 36A to the LED (designed by Cuve Systems) from supplier: > 150W) 1 high performance thermal interface material Example: Manufacturer: FastTech Simple cable interfaces to user-supplied Luminus Part Number: S-300-12 (12V for LED <8V) Low Voltage High Current devices. Alternative: S-250-24 (24V for LED >8V) Blower style fan with mounting hardware Standard laboratory instrumentation Volt meter, User Manual Oscilloscope, and/or Photodetector for monitoring PWM control recommended for dimming Note: Luminus LED products are not included in the development kits and must be purchased separately. Product compatibility is not limited to the table below. Product Compatibility Luminus LEDs Max Drive Current Compatible Luminus LEDs 1.5A-8A SST-70X-W (6V) 6A-9.57A / 12A-13.5A PT-26-RA/CG/B , PT-39-DR/G/B , PTM-40-RA/CG/B, CBM-50X-UV, SBM-120-UV 13.5A-18A SBT-70-B/G , SBT-90-R , CBM-90-IRD , CBM-120-UV/FR , CBT-90-W 18.9A-28A PT-50-RA/CG/B , PT-54-RAX/G/B , CBT-90-R/G/B/UV , CFT-90 , CBT-140-W 30A/36A* PT-120-RAX/G/B , PT-121-G/B, PT-121-RAX Notes * : Recommended product for optimal use : Product can be used, but is prone to overdriving conditions Ordering Information Ordering Part Number Product Description Single channel development kit, with Cuvee driver board, heat DK-236 Development Kit DK-236 sink, cable assemblies and user manual Single Channel The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries. 2 PDB-002846 Rev 01 2020 Luminus Devices, Inc. - All Rights Reserved