TO-18 Ceramic Package Photocell NS 5152 WWW.LUNAINC.COM Precision Control Results 36 +/- 2 3.4 +/- 0.2 4.1 +/- 0.2 2.5 1.8 Max Lead dia.: 0.4 +/- 0.05 Dimensions in mm. DESCRIPTION FEATURES The NSL-5152 is a light dependent resistor with sensitivity in the visible Passive resistance output light region. The CdS photoconductive cell is on a TO-18 ceramic and the Ceramic package photocell surface is plastic encapsulated for moisture resistance. RELIABILITY APPLICATIONS Contact Luna for recommendations on specific test conditions and Industrial procedures. ABSOLUTE MAXIMUM RATINGS SYMBOL MIN MAX UNITS Voltage (peak AC or DC) - - 100 V T = 23C UNLESS NOTED OTHERWISE a 1 Power Dissipation 25C - - 50 mw - Operating Temperature -60 to +75 C - Storage Temperature -60 to +75 C - 2 Soldering Temperature - - +260 C - NOTE: 1.Derate linearly to 0 at 75C 2. >0.05 from base for < 10 sec. Information in this technical datasheet is believed to REV 01-04-16 be correct and reliable. However, no responsibility is Page 1/2 assumed for possible inaccuracies or omission. 2016 Luna Optoelectronics. All rights reserved. Specifications are subject to change without notice. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 Phone (805) 987-0146 Fax (805) 484-9935 TO-18 Ceramic Package Photocell NS 5152 WWW.LUNAINC.COM Precision Control Results T = 23C UNLESS NOTED OTHERWISE a OPTO-ELECTRICAL PARAMETERS PARAMETER TEST CONDITIONS MIN TYP MAX UNITS 3 2 ftc., 2854K 10 15 20 K Light Resistance 3 100 ftc., 2854K - 400 - 5 sec after removal of test light Dark Resistance 10 - - K Spectral Peak - - 550 - nm NOTE: 3 Cells light adapted at 30 to 50 Ftc for 16 hrs minimum prior to electrical tests. Information in this technical datasheet is believed to REV 01-04-16 be correct and reliable. However, no responsibility is Page 2/2 assumed for possible inaccuracies or omission. 2016 Luna Optoelectronics. All rights reserved. Specifications are subject to change without notice. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 Phone (805) 987-0146 Fax (805) 484-9935