MX29LV400C T/B
MX29LV800C T/B
MX29LV160C T/B
MX29LV400C T/B, MX29LV800C T/B,
MX29LV160C T/B
DATASHEET
The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B
product family is not recommended for new designs. The MX29LV160D T/B family is the
recommended replacement. Please refer to MX29LV160D T/B datasheet for full specicfi ations
and ordering information, or contact your local sales representative for additional support.
P/N:PM1300 REV. 2.6, DEC. 22, 2011
1MX29LV400C T/B
MX29LV800C T/B
MX29LV160C T/B
SINGLE VOLTAGE 3V ONLY FLASH MEMORY
The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B
product family is not recommended for new designs. The MX29LV160D T/B family is the
recommended replacement. Please refer to MX29LV160D T/B datasheet for full specicfi ations
and ordering information, or contact your local sales representative for additional support.
FEATURES
GENERAL FEATURES
Byte/Word mode switchable:
- 524,288 x8 / 262,144 x16 (MX29LV400C)
- 1,048,576 x8 / 524,288 x16 (MX29LV800C)
- 2,097,152 x8 / 1,048,576 x16 (MX29LV160C)
Sector Structure
- 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1
64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)
- Provides sector protect function to prevent program or erase operation in the protected sector
- Provides chip unprotect function to allow code changing
- Provides temporary sector unprotect function for code changing in previously protected sector
Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
Latch-up protected to 250mA from -1V to Vcc + 1V
Low Vcc write inhibit : Vcc 1.4V
Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device
PERFORMANCE
High Performance
- Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns
- Fast program time: 7us/word typical utilizing accelerate function
- Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C)
Low Power Consumption
- Low active read current: 10mA (typical) at 5MHz
- Low standby current: 200nA (typical)
Minimum 100,000 erase/program cycle
20 years data retention
SOFTWARE FEATURES
Erase Suspend/ Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being
erased
Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
Support Common Flash Interface (CFI)
HARDWARE FEATURES
Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
P/N:PM1300 REV. 2.6, DEC. 22, 2011
2