SOLENOIDS AND SOLUTIONS QUALITY SINCE 1912 D C Small Shotbolt 1 Lock Assembly Product group Spring to lock - energise to unlock Stroke 10mm Type G HU Z 040 M20 D03 (Rectifier for A.C. supply) According to VDE 0580 and ISO 9001 (conform with article 10 of directions 73/23/EEC - according to CENELEC memorandum no. 3 of March 1987) Spring to lock, energise to unlock Integral spring and high endurance, maintenance free bearings Robust cylindrical construction Threaded nose mounting Fig. 1 G HU Z 040 M20 D03 Suitable for mounting and operation in any attitude Force characteristic (Fig. 2) For direct-acting solenoid equivalent see data sheet G TC A Coil with insulation to class F, for voltages up to 250 volts Protection classicfi ation - DIN VDE 0470 / EN60529 Flying leads - IP 00 Shotbolt, ratchet and holding magnet locks available in other product groups Application Access Controls Shutters Interlocks Machine Tools Guards interlocking applications in commerce and industry and gates indexing Magnet Schultz Limited 3-4 Capital Park Old Woking Surrey GU22 9LD UK +44(0)1483 794700 7+44(0)1483 757298 sales magnetschultz.co.uk www.magnetschultz.co.uk R2 Sales magnetschultz.co.uk SOLENOIDS AND SOLUTIONS +44(0)1483 794700 QUALITY SINCE 1912 20 F Performance and dimensions for type G HU Z 040 M20 D03 M F = 35N at 0mm M (N) 18 Fig 2 G HU Z 040 M20 D03 16 Duty rating (ED) (%) 100 14 Stroke (s) (mm) 10 Work rating (A ) (Ncm) 10.8 N 12 Solenoid Power consumption (P ) (W) 12.9 20 10 0 Ambient temperature ( d ) ( C) 35 11 Frequency of operating (S max) (1/h) 25000 8 h Closing time (t ) (ms) 85 1 6 Opening time (t ) (ms) 50 2 Spring 4 Armature weight (m ) (kg) 0.078 A Solenoid weight (m ) (kg) 0.46 2 M Radial bolt load (max) allowable 0 (approx) static (N) 1500 2 4 6 8 10 0 stroke (N) 8 s (mm) Force/stroke characteristic PERFORMANCE TABLE POWER CONSUMPTION (P ) 20 Terms are explained in Technical Bulletin G XX & VDE 0580 0 Listed wth a 20 C coil temperature (decrease/HOT) TABLE BASIS MAGNETIC FORCE (F ) M 0 24V DC 100% duty. Ambient temperature 35 C Listed in HOT condition at 90% of rated voltage Heat insulated,free air. horizontal/pull mounted (increase approx 20% at rated voltage). Adjust for Tolerance +/- 10% (inherent and manufacture) armature weight MOUNTING OPERATING TIMES Threaded nose mounting with lock nut provides high rigidity. Shotbolts of other sizes (t /t ) are listed per cycle of operating in HOT condition 1 2 and mounting arrangements including ratchet and holding magnet locks are at rated voltage with weight load of 70% of force (F ) M in product groups: G HU Z, G FC, G TC A, G TC E, G DA, G DC, G MH, G MP. at and over rated stroke SUPPLY VOLTAGE LOCK-BOLT The standard supply voltages are: 12V and 24V, DC Radial load to the bolt should be kept within the max. allowable (see table above) so other voltages upon request ensuring maximum reliability and operational life with a minimum of maintenance. electronic control is available to give increased stroke force with continuous duty hold. PROTECTION over voltage of 2:1 will give approx. 20N at initiation of stroke Passivated zinc body t (on) DUTY RATING (ED %) x100 ORDER CODE t (on) + t (off) % of energised time per cycle Type G HU Z 040 M20 D03 Voltage 24V D.c. Fig.3 Duty rating (ED%) 100% G HU Z 040 M20 D03 12 Armature push rod (protrudes 11 57 8mm when energised) Q 5.0 M3 Q 6 39 +0.5 - 0.3 Stroke s =10 Data may be changed without prior notice - Dimensions not guaranteed Subject to our Standard Conditions 0907 35 M16 x 1 8 0 4 300 +1 6 - 0