Product Data Sheet 26TB XX F Replace XX with 06, 08, 10 or 12 for number of poles Navy Class Terminal Board 20 Amps, 60 Hz (6 Pole shown) 300 Volts RMS Copper Wire Only Double Stud Double Row (2) Barrel Nuts and (1) Stud Connector Provided per line (Shipped unassembled) Recommended Maximum size wire: 16 AWG NOT TO SCALE Stud Connector is considered part of the stud and is required, unless otherwise specified. With the stud connector removed, the terminal board will provide twice the number of connection points and allow for an additional wire per terminal. Proper termination with stud connector Proper termination without stud connector Electrical Ratings: 20A , 60Hz 300 Volts RMS 1500 Volts RMS Dielectric Withstanding Voltage Mechanical Ratings: Maximum insulator base temperature: 130C (266F)* UL RTI Flammability rating of insulator base: UL 94V-0 Materials: Insulator base: MAI-60 in accordance with MIL-M-14. Stud 4-40 NC-2: Brass, unplated Barrel Nut: Brass, unplated (provided loose) (9202036) Stud Connector: Brass, unplated (9202066) Agency Approvals: A-A-59125 / 24 , (supercedes MIL-T-55164 / 24) MAI-60 in accordance with MIL-M-14 RoHS Compliant Wire Range: Maximum size: 16 AWG Copper Lug information: MS17143 20 Maximum Lug Width : 0.242 (6.1 mm) Recommended Torque: 6 8 in. lbs. (0.7 0.9 Nm) Screw Size: 4 Suggested product mounting hardware: 6 fastener, torque to 10-15 in. lbs. Barrel Nut Screwdrivers can be purchased at the following link: