Product Data Sheet 6SJ30AxIC Replace x with 1, 2, or 3 for number of poles Fuse Holder, Enclosed J Class with Indication 30 Amps 600 Volts AC/DC Wire Range 1 AWG - 18 AWG stranded 10 AWG - 18 AWG solid Copper wire only Electrical Ratings 30A, 600V AC/DC SC withstand 200kA CU7 - 75C connector terminal rating Factory & field wiring Agency Compliance UL Listed fuse holder, evaluated to UL 4248-1 and UL 4248-8, file no. IZLT.E35113 CNL - investigated to CSA C22.2 No 4248.1-07 and CSA C22.2 4248.8-07 Material Information Insulator base: Thermoplastic Flammability rating of insulator base UL94 V-0 Insulator base temperature rating: -40C to 140C (UL RTI) Fuseclip - copper, tin plated Spring - steel, zinc plated Terminal screws - steel, zinc plated RoHS compliant A Regal Brand www.marathonsp.com 1Termination Specifications Wire Size Torque Wires / 1 Wire Class (UL) (CU Stranded) N-m (lbf-in) Terminal 1 - 8 4.5 Nm (40 lbfin) 1 B, C 10 - 18 2.8 Nm (25 lbfin) 1 B, C 6 - 18 2.8 Nm (25 lbfin) 2* B, C * (2) wires must be of same size and type Solid copper wire range: 10-18 AWG Wire strip length: 16 mm (5/8) Installation & Accessories Mounting: 7.5 X 35 mm DIN rail mountable Safety Guidelines: Do not open under load Catalog Description Fuse holder - J 30A (where x represents no. of poles) 6SJ30Ax C Fuse holder - J 30A with indication (where x represents no. of poles) 6SJ30AxI C Marker card - single white, snap-in labels 10mm wide for individual identification Ganging clips - used to group multiple fuse holders together as an assembly. Includes (10) EFH-MCCK C handle pins and (20) body clips. Use one handle pin and two body clips per pole Din rail - 35 x 7.5 x 200mm long, slotted MN35-2 MSK35 End bracket - for anchoring in place on din rail www.marathonsp.com 2 PDS 0487 REV-B 01/25/16