110-000-04-50 Marl

110 series features 5.0mm LED Material conforms to UL94 V-O flammability ratings Colour diffused lens Bi-colour and resistor models enhance potential for saving assembly time and board space Reverse polarity options available Typically available ex stock Pack Quantity = 250 Pieces specifications Ordering information and typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 110-505-04 Red 2.0 Vdc 20 30 625 -40 - +85 -40 - +85 B 110-511-04 Yellow 2.1 Vdc 20 63 590 -40 - +85 -40 - +85 B 110-514-04 Green 2.2 Vdc 20 35 565 -40 - +85 -40 - +85 C 110-530-04 Red/Green 2.0/2.2 Vdc 20 30/20 625/565 -40 - +85 -40 - +85 E2 = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 110 - version 2014-04-29-173138 page 1 of 4 pcb led indicators30 30 30 110 series technical data Dimensions in mm (typical) Not to scale 6.2 6.6 8.8 0.5 Saq 2.54 5 2.54 housing material Polycarbonate This material offers UL94 V-O flame retardancy* and a high impact strength. This material has a melting point of 290-340c and is suitable for use in the majority of automatic soldering processes *Material test thickness of 1.6mm de-rating information Derating Graph B Derating Graph E2 Derating Graph C 55 55 55 50 50 50 45 45 45 40 40 40 35 35 35 R 25 25 25 G 20 20 20 15 15 15 10 10 10 8 5 5 5 0 0 0 0.0 20.0 40.0 60.0 80.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 Ambient Temperature Ta (C) Ambient Temperature Ta (C) Ambient Temperature Ta (C) to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 110 - version 2014-04-29-173138 page 2 of 4 Forward Current IF (mA) 12 12.4 3.1 6.3 Forward Current IF (mA) Forward Current IF (mA)