512-532-23 Marl

512 series features 12.7mm mounting Robust bright nickel plated brass housing Sealed to IP67, suitable for high vibration applications Smoked lens style Flying lead terminations available Internal reverse protection diode fitted as standard in all voltage models Pack Quantity = 10 Pieces specifications Typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 512-501-21 Red 12 Vdc 19 600 630 -40 - +80 -40 - +100 D 512-521-21 Yellow 12 Vdc 19 600 585 -40 - +80 -40 - +100 D 512-532-21 Green 12 Vdc 20 2300 515 -40 - +75 -40 - +100 F 512-930-21 Blue 12 Vdc 20 9870 465 -30 - +85 -40 - +100 U 512-997-21 White 12 Vdc 20 27000 * See below -30 - +85 -40 - +100 I 512-501-23 Red 28 Vdc 20 600 630 -40 - +80 -40 - +100 D 512-521-23 Yellow 28 Vdc 20 600 585 -40 - +80 -40 - +100 D 512-532-23 Green 28 Vdc 20 2300 515 -40 - +75 -40 - +100 F 512-930-23 Blue 28 Vdc 20 9870 465 -30 - +85 -40 - +100 U 512-997-23 White 28 Vdc 20 27000 * See below -30 - +85 -40 - +100 I 997F-C *Typical emission colour White x 0.31 - - - y 0.32 - - - = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. - Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 512 - version 2014-02-27-173334 page 1 of 5 industrial panel lamps512 series technical data +0.1 12.7 6 21 6 0 Mounting Hole Anode termination indicated by red sleeve. Mounting hole to be clean and burr free. Dimensions in mm (typical) Not to scale housing material push on connectors Brass to BS 2874 CZ121, Nickel plated to BS 1224 Body Brass to BS 2874 CZ121, Nickel plated to BS 1224 Nut Viton Panel Seal Termination Brass to BS 2874 CZ108. Copper flash base, silver flash finish Polycarbonate Lens 925-000-00 is brass tin plated - for use PC5430 Resin Encapsulation with 512 series lamps Zinc Plated Steel Lock Washer Dimensions in mm (typical). Not to scale. Header - technical characteristics Max. Power Max. Reverse Nut Mounting Min. Mounting Max. Panel Series Panel Cutout Dissipation Voltage Torque Centres Thickness 512 1000 1000 12.7 1.0 19.5 1.5 - 8.0 units mW Vdc mm Nm mm mm * = Current version = Voltage version optional flying lead terminators O rder Code Supply Wire Wire No/Diameter Diameter Comments Suffix Voltage Colour Length of Conductor Insulation 15 DC products Red-anode/ Black-cathode 150mm Customised 15 AC products Brown-live/ Blue-neutral 150mm 19/0.15mm 1.2mm lengths 19 DC products Red-anode/ Black-cathode 1000mm available 19 AC products Brown-live/ Blue-neutral 1000mm to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 512 - version 2014-02-27-173334 page 2 of 5 17 10 2.80