520-934-21 Marl

520 series features 6.1mm mounting Robust stainless steel housing Counter sunk mounting for flush styling Sealed to IP67, vandal resistant Sunlight readable LEDs with a colour diffused lens Internal reverse protection diode fitted as standard in all voltage models Pack Quantity = 10 Pieces specifications Typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 520-301-21 Red 12 Vdc 20 39 660 -40 - +85 -40 - +85 A 520-325-21 Yellow 12 Vdc 20 87 590 -40 - +100 -40 - +120 Y 520-324-21 Green 12 Vdc 20 576 523 -30 - +85 -40 - +100 R 520-934-21 Blue 12 Vdc 20 128 468 -30 - +85 -40 - +100 R 520-998-21 White 12 Vdc 20 414 * See below -30 - +85 -40 - +100 H 520-301-23 Red 28 Vdc 20 39 660 -40 - +85 -40 - +85 A 520-325-23 Yellow 28 Vdc 20 87 590 -40 - +100 -40 - +120 Y 520-324-23 Green 28 Vdc 20 576 523 -30 - +85 -40 - +100 R 520-934-23 Blue 28 Vdc 20 128 468 -30 - +85 -40 - +100 R 520-998-23 White 28 Vdc 20 414 * See below -30 - +85 -40 - +100 H 998F *Typical emission colour White x 0.287 0.283 0.330 0.330 y 0.295 0.305 0.360 0.339 = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. - Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 520 - version 2013-09-24-173354 page 1 of 5 industrial panel lamps520 series technical data * 24 10 Sealing Ring Panel Seal *Min/max panel thickness is 3mm / 6.5mm. Anode termination indicated by long pin. Mounting hole to be clean and burr free. Dimensions in mm (typical) Not to scale housing material push on connectors Stainless Steel Grade 303 Body Stainless Steel Grade 303 Nut Nitrile Panel Seal Termination Phosphor bronze with tin on nickel finish Polycarbonate Lens 909-000-00 is gold plated, 910-000-00 is PC5430 Resin Encapsulation tin plated - for use with 520 series lamps. Stainless Steel Lock Washer Dimensions in mm (typical). Not to scale. Header - technical characteristics Max. Power Max. Reverse Nut Mounting Min. Mounting Max. Panel Series Panel Cutout Dissipation Voltage Torque Centres Thickness 520 500 1000 6.1 0.65 15.0 3.0 - 6.5 units mW Vdc mm Nm mm mm * = Current version = Voltage version optional flying lead terminators O rder Code Supply Wire Wire No/Diameter Diameter Comments Suffix Voltage Colour Length of Conductor Insulation 15 DC products Red-anode/ Black-cathode 150mm Customised 15 AC products Brown-live/ Blue-neutral 150mm 19/0.15mm 1.2mm lengths 19 DC products Red-anode/ Black-cathode 1000mm available 19 AC products Brown-live/ Blue-neutral 1000mm to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 520 - version 2013-09-24-173354 page 2 of 5 45.00 12.5 +0.1 6.1 0 12 2.54 Ctrs 0.5 Sq