604-998-23 Marl

604 series features 5.0mm mounting Robust bright nickel plated brass housing Sealed to IP67 Smoked lens with a wide viewing angle Suitable for high vibration applications Internal reverse protection diode fitted as standard in all voltage models Pack Quantity = 10 Pieces specifications Typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 604-301-04 Red 2.1 Vdc 20 900 660 -40 - +85 -40 - +85 A 604-325-04 Yellow 2.2 Vdc 20 3500 590 -40 - +100 -40 - +120 Y 604-324-04 Green 2.2 Vdc 20 36000 523 -30 - +85 -40 - +100 R 604-934-04 Blue 2.2 Vdc 20 7485 468 -30 - +85 -40 - +100 R 604-998-04 White 2.2 Vdc 20 12900 * See below -30 - +85 -40 - +100 H 604-301-23 Red 28 Vdc 20 900 660 -40 - +85 -40 - +85 A 604-325-23 Yellow 28 Vdc 20 3500 590 -40 - +100 -40 - +120 Y 604-324-23 Green 28 Vdc 20 36000 523 -30 - +85 -40 - +100 R 604-934-23 Blue 28 Vdc 20 7485 468 -30 - +85 -40 - +100 R 604-998-23 White 28 Vdc 20 12900 * See below -30 - +85 -40 - +100 H 998 *Typical emission colour White x 0.287 0.283 0.330 0.330 y 0.295 0.305 0.360 0.339 = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. - Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 604 - version 2014-04-29-173432 page 1 of 4 high performance panel lamps604 series technical data HHeeaaddeerr 2.5 15.2 150 5 MOUNTING HOLE Dimensions in mm (typical) Anode termination denoted by red indicator Not to scale Mounting hole to be clean and burr free housing material Body Bright Nickel Plated Brass Bright Nickel Plated Brass Nut Viton Panel Seal Polycarbonate Fresnel Lens Epoxy Encapsulation Beryllium Copper Lock Washer Termination Tags - Header - technical characteristics Max. Power Max. Reverse Nut Mounting Min. Mounting Max. Panel Series Panel Cutout Dissipation Voltage Torque Centres Thickness 604 425 3*/75 5.0 0.35 10.0 1.5 - 8.0 units mW Vdc mm Nm mm mm * = Current Version = Voltage Version optional flying lead terminations O rder Code Supply Wire Wire No/Diameter Diameter Comments Suffix Voltage Colour Length of Conductor Insulation Customised 19 DC products Red-anode/ Black-cathode 1000mm 19/0.15mm 1.2mm lengths available to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 604 - version 2014-04-29-173432 page 2 of 4 +0.1 5 0 7.9 5.1