651-114-75 Marl

651 series features 12.7mm mounting Black anodised aluminium housing Colour diffused lens with a wide viewing angle Sealed to IP67 Suitable for high vibration applications Internal reverse protection diode fitted as standard in all voltage models Pack Quantity = 10 Pieces specifications Typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 651-105-21 Red 12 Vdc 20 95 625 -40 - +85 -40 - +85 B 651-111-21 Yellow 12 Vdc 20 45 590 -40 - +85 -40 - +85 B 651-114-21 Green 12 Vdc 20 45 565 -40 - +85 -40 - +85 C 651-105-23 Red 24-28 Vdc 20 95 625 -40 - +85 -40 - +85 B 651-111-23 Yellow 24-28 Vdc 20 45 590 -40 - +85 -40 - +85 B 651-102-21 Red 12 Vdc 19 500 660 -40 - +85 -40 - +85 B = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 3. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 651 - version 2013-09-24-173504 page 1 of 5 high performance panel lamps651 series technical data HHeeaaddeerr +0.1 12.7 11.5 21 6 0 Mounting Hole Dimensions in mm (typical) Anode termination denoted by red indicator Not to scale Mounting hole to be clean and burr free housing material push on connectors Body Black Anodised Aluminium Bright Nickel Plated Brass Nut Viton Panel Seal Epoxy Fresnel Lens PC5430 Resin Encapsulation Spring Steel 925-000-00 should be used with the 651 Lock Washer series lamp and in brass tin plated Termination - Dimensions in mm (typical). Not to scale. Header - technical characteristics Max. Power Max. Reverse Nut Mounting Min. Mounting Max. Panel Series Panel Cutout Dissipation Voltage Torque Centres Thickness 651 1000 3*/1000 12.7 1.0 19.5 1.5 - 8.0 units mW Vdc mm Nm mm mm * = Current Version = Voltage Version optional flying lead terminations O rder Code Supply Wire Wire No/Diameter Diameter Comments Suffix Voltage Colour Length of Conductor Insulation Customised 19 DC products Red-anode/ Black-cathode 1000mm 19/0.15mm 1.2mm lengths available to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 651 - version 2013-09-24-173504 page 2 of 5 17 10 2.8 +0.1 11.3 0