SP26LV432EN-L MaxLinear

SP26LV432 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER MARCH 2020 REV. 1.0.2 FEATURES GENERAL DESCRIPTION Quad Differential Line Receivers The SP26LV432 is a quad differential line receiver with three-state outputs designed to meet the EIA Compatible with the EIA standard for RS-422 serial specifications of the RS-422 serial protocol. The protocol SP26LV432 features Exar s BiCMOS process High-Z Output Control allowing low power operational characteristics of CMOS technology while meeting all of the demands Switching Rates Up to 50Mbps of the RS-422 serial protocol at 50Mbps under load. 14ns Typical Receiver Propagation Delays The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The 60mV Typical Input Hysteresis SP26LV432 features a receiver enable control Single +3.3V Supply Operation common to all four receivers and a high-Z output with 6mA source and sink capability. Since the cabling can Common Receiver Enable Control be as long as 4,000 feet, the RS-422 receivers of the 26LV32 industry standard footprint compatible SP26LV432 are equipped with a wide (-7.0V to +7.0V) common-mode input voltage range to Ideal For Use with SP26LV431, Quad Drivers accommodate ground potential differences. -7.0V to +7.0V Common-Mode Input Voltage range FIGURE 1. TYPICAL APPLICATION CIRCUIT 1SP26LV432 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER REV. 1.0.2 FIGURE 2. PIN OUT ASSIGNMENT (1) ORDERING INFORMATION OPERATING TEMPERATURE (2) PART NUMBER PACKAGE PACKAGING METHOD LEAD-FREE RANGE SP26LV432CN-L 0C to +70C 16-pin Narrow SOIC Tube Yes SP26LV432CN-L/TR 0C to +70C 16-pin Narrow SOIC Tape and Reel Yes NOTES: 1. Refer to www.maxlinear.com/SP26LV432 for most up-to-date Ordering Information. 2. Visit www.maxlinear.com for additional information on Environmental Rating. 2