SP3223E / SP3223EB / SP3223EU Intelligent +3.0V to +5.5V RS-232 Transceivers FEATURES Meets true EIA/TIA-232-F Standards EN 1 20 SHUTDOWN from a +3.0V to +5.5V power supply C1+ 2 19 Vcc Interoperable with EIA/TIA-232 and V+ 3 18 GND adheres to EIA/TIA-562 down to a +2.7V power source C1- 4 17 T OUT 1 AUTO ON-LINE circuitry automatically SP3223E 5 16 C2+ R IN 1 wakes up from a 1A shutdown C2- 6 15 R OUT Minimum 250Kbps data rate under load 1 (EB) V- 7 14 ONLINE 1 Mbps data rate for high speed RS-232 T OUT 8 13 T IN 2 1 (EU) R IN 9 12 T IN 1 2 Regulated Charge Pump Yields Stable R OUT 10 RS-232 Outputs Regardless of V 11 STATUS 2 CC Variations ESD Specifications: +15KV Human Body Model Now Available in Lead Free Packaging +15KV IEC61000-4-2 Air Discharge +8KV IEC61000-4-2 Contact Discharge DESCRIPTION The SP3223 products are RS-232 transceiver solutions intended for portable applications such as notebook and hand held computers. These products use an internal high-efficiency, charge-pump power supply that requires only 0.1F capacitors in 3.3V operation. This charge pump and Exar s driver architecture allow the SP3223 series to deliver compliant RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3223 is a 2- driver/2-receiver device ideal for laptop/notebook computer and PDA applications. The AUTO ON-LINE feature allows the device to automaticallywake-u during a shut- down state when an RS-232 cable is connected and a connected peripheral is turned on. Otherwise, the device automatically shuts itself down drawing less than 1A. SELECTION TABLE Device Power RS- 232 RS-232 AUTO ON-LINE TTL Data Rate Supplies Drivers Receivers 3-state (kbps) SP3223E +3.0V to +5.5V 2 2 YES YES 120 SP3223EB +3.0V to +5.5V 2 2 YES YES 250 SP3223EU +3.0V to +5.5V 2 2 YES YES 1000 SP3223E/EB/EU 102 031920 1ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation Output Voltages of the device at these ratings or any other above those TxOUT.............................................................+13.2V indicated in the operation sections of the specifications RxOUT, STATUS.......................-0.3V to (V + 0.3V) CC below is not implied. Exposure to absolute maximum Short-Circuit Duration rating conditions for extended periods of time may TxOUT.....................................................Continuous affect reliability and cause permanent damage to the Storage Temperature......................-65C to +150C device. V .......................................................-0.3V to +6.0V CC Power Dissipation per package V+ (NOTE 1).......................................-0.3V to +7.0V V- (NOTE 1)........................................+0.3V to -7.0V o o 20-pin SSOP (derate 9.25mW/ C above +70 C)..750mW V+ + V- (NOTE 1)...........................................+13V o o 20-pin TSSOP (derate 11.1mW/ C above +70 C..900mW I (DC V or GND current).........................+100mA CC CC Input Voltages TxIN, ONLINE, SHUTDOWN, EN......................-0.3V to VCC + 0.3V RxIN...................................................................+15V NOTE 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V. ELECTRICAL CHARACTERISTICS Unless otherwise noted, the following specifications apply for V = +3.0V to +5.5V with T = T to T . CC AMB MIN MAX Typical values apply at V = +3.3V or +5.0V and T = 25C (Note 2). CC AMB PARAMETER MIN. TYP. MAX. UNITS CONDITIONS DC CHARACTERISTICS All RxIN open, ONLINE = GND, SHUTDOWN = Vcc, TxIN = Vcc or Supply Current, 1.0 10 A GND, Vcc = +3.3V, T = +25C AMB AUTO ON-LINE SHUTDOWN = GND, TxIN = Supply Current, Shutdown 1.0 10 A Vcc or GND, Vcc = +3.3V, T = AMB +25C Supply Current, 0.3 1.0 mA ONLINE = SHUTDOWN = Vcc, No AUTO ON-LINE Disabled Load, Vcc = +3.3V, T = +25C AMB LOGIC INPUTS AND RECEIVER OUTPUTS Input Logic Threshold Vcc = 3.3V or 5.0V, LOW GND 0.8 V TxIN, EN, SHUTDOWN, ONLINE HIGH 2.0 Vcc Input Leakage Current +/-0.01 +/-1.0 A TxIN, EN, ONLINE, SHUTDOWN, T = +25C, Vin = 0V to Vcc AMB Output Leakage Current +/-0.05 +/-10 A Receivers disabled, Vout = 0V to Vcc Output Voltage LOW 0.4 V I = 1.6mA OUT Output Voltage HIGH Vcc - 0.6 Vcc - 0.1 V I = -1.0mA OUT NOTE 2: C1 - C4 = 0.1F, tested at 3.3V 10%. C1 = 0.047F, C2-C4 = 0.33F, tested at 5V10%. SP3223E/EB/EU 102 031920 2