SP3232EH 3.3V, 460 kbps RS-232 Transceiver FEATURES Meets true EIA/TIA-232-F Standards 16 VCC C1+ 1 from a +3.0V to +5.5V power supply Interoperable with RS-232 down to a 2 GND V+ 15 +2.7V power source C1- 3 Enhanced ESD Specifications: 14 T1OUT +15kV Human Body Model SP3232EH 4 C2+ 13 R1IN +15kV IEC61000-4-2 Air Discharge +8kV IEC61000-4-2 Contact Discharge 5 12 R1OUT C2- 460kbps Minimum Transmission Rate 11 V- 6 T1IN Ideal for Handheld, Battery Operated Applications T2OUT 7 10 T2IN R2IN 8 9 R2OUT Now Available in Lead Free Packaging DESCRIPTION The SP3232EH is a 2 driver / 2 receiver RS-232 transceiver solution intended for portable or hand-held applications such as notebook or laptop computers. The data transmission rate of 460kbps can meet the demands of high speed RS-232 applications. This device has a high- efficiency, charge-pump power supply that requires only 0.1F capacitors in 3.3V operation. This charge pump allows the SP3232EH device to deliver true RS-232 performance from a single power supply ranging from +3.0V to +5.5V. The ESD tolerance of the SP3232EH device exceeds +/-15kV for both Human Body Model and IEC61000-4-2 Air discharge test methods. SELECTION TABLE Power RS-232 RS-232 External TTL of Device Shutdown Supplies Drivers Receivers Components 3-State Pins SP3232EH +3.0V to +5.5V 2 2 4 No No 16 SP3232EH 10 3 031 920 1ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent damage to the device. Power Dissipation per package V .......................................................-0.3V to +6.0V CC o o 16-pin SSOP (derate 9.69mW/ C above +70 C)...............775mW V+ (NOTE 1).......................................-0.3V to +7.0V o o 16-pin PDIP (derate 14.3mW/ C above +70 C)...............1150mW V- (NOTE 1)........................................+0.3V to -7.0V o o 16-pin Wide SOIC (derate 11.2mW/ C above +70 C)........900mW V+ + V- (NOTE 1)...........................................+13V o o 16-pin TSSOP (derate 10.5mW/ C above +70 C)..............850mW I (DC V or GND current).........................+100mA CC CC Input Voltages TxIN, ...................................................-0.3V to +6.0V RxIN...................................................................+15V Output Voltages TxOUT.............................................................+13.2V RxOUT, .......................................-0.3V to (V +0.3V) CC Short-Circuit Duration TxOUT....................................................Continuous Storage Temperature......................-65C to +150C NOTE 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V. ELECTRICAL CHARACTERISTICS Unless otherwise noted, the following specifications apply for V = +3.0V to +5.5V with T = T to T CC AMB MIN MAX PARAMETER MIN. TYP. MAX. UNITS CONDITIONS DC CHARACTERISTICS Supply Current 0.3 1.0 mA no load, V = 3.3V, CC o T = 25 C, TxIN = GND or V AMB CC LOGIC INPUTS AND RECEIVER OUTPUTS Input Logic Threshold LOW GND 0.8 V TxIN Input Logic Threshold HIGH 2.0 Vcc V Vcc = 3.3V Input Logic Threshold HIGH 2.4 Vcc V Vcc = 5.0V o Input Leakage Current +0.01 +1.0 A TxIN, T = +25 C AMB Output Voltage LOW 0.4 V I = 1.6mA OUT Output Voltage HIGH V -0.6 V -0.1 V I = -1.0mA CC CC OUT DRIVER OUTPUTS Output Voltage Swing +5.0 +5.4 V All driver outputs loaded with 3k to o GND, T = +25 C AMB SP3232EH 10 3 031 920 2