SP485ECP-L MaxLinear

SP481E / SP485E Enhanced Low Power Half-Duplex RS-485 Transceivers Description FEATURES The SP481E and SP485E are a family of half-duplex transceivers that 5V only meet the specifications of RS-485 and RS-422 serial protocols with Low power BiCMOS Driver / receiver enable for multi-drop enhanced ESD performance. The ESD tolerance has been improved configurations on these devices to over 15kV for both Human Body Model and Low power shutdown mode (SP481E) IEC61000-4-2 Air Discharge Method. These devices are pin-to-pin Enhanced ESD specifications: compatible with MaxLinears SP481 and SP485 devices as well as 15kV Human Body Model popular industry standards. As with the original versions, the SP481E 15kV IEC61000-4-2 Air Discharge and SP485E feature Maxlinears BiCMOS design allowing low power 8kV IEC61000-4-2 Contact operation without sacrificing performance. The SP481E and SP485E Discharge meet the requirements of the RS-485 and RS-422 protocols up Available in RoHS compliant, lead free to 10Mbps under load. The SP481E is equipped with a low power packaging. shutdown mode. Ordering Information - Back Page Block Diagram RO 1 R 8 VCC 2 7 B RE DE 3 6 A DI 4 D 5 GND SP481E and SP485E REV 1.0.5 1/9SP481E / SP485E Absolute Maximum Ratings These are stress ratings only and functional operation of the ESD Ratings device at these ratings or any other above those indicated HBM - Human Body Model (A and B pins).................15kV in the operation sections of the specifications below is not HBM - Human Body Model (All other pins)................ 3kV implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. IEC61000-4-2 Air Discharge (A and B pins)...............15kV IEC61000-4-2 Contact Discharge (A and B pins).........8kV V .............................................................................7.0V CC Input Voltages Logic ........................ -0.3V to (V + 0.5V) CC Drivers......................-0.3V to (V + 0.5V) CC Receivers.........................................15V Output Voltages Logic ........................ -0.3V to (V + 0.5V) CC Drivers ...............................................15V Receivers..................-0.3V to (V + 0.5V) CC Storage Temperature .................................-65C to +150C Power Dissipation 8-pin NSOIC ............................................................550mW (derate 6.60mW/C above +70C) Electrical Characteristics T = T to T and V = 5V 5% unless otherwise noted. AMB MIN MAX CC PARAMETERS MIN. TYP. MAX. UNITS CONDITIONS SP481E / SP485E Driver DC Characteristics Differential output voltage V V Unloaded R = Figure 1 CC Differential output voltage 2 V V With load R = 50 (RS-422) Figure 1 CC Differential output voltage 1.5 V V With load R = 27 (RS-485) Figure 1 CC Change in magnitude of driver differential output voltage for 0.2 V R = 27 or R = 50 Figure 1 complimentary states Driver common-mode output voltage 3 V R = 27 or R = 50 Figure 1 Input high voltage 2.0 V Applies to DE, DI, RE Input low voltage 0.8 V Applies to DE, DI, RE Input current 10 A Applies to DE, DI, RE Driver short circuit current 250 mA -7V V 12V O V = HIGH OUT Driver short circuit current 250 mA -7V V 12V O V = LOW OUT REV 1.0.5 2/9