DATASHEET BCAP0005 P270 S01 2.7V 5F ULTRACAPACITOR CELL ESHSR-0005C0-002R7 FEATURES AND BENEFITS TYPICAL APPLICATIONS High performance product with low Actuators Backup System ESR Emergency Lighting Smoke Detectors Exceptional shock and vibration Telematics Advanced Metering resistance Automotive Long lifetimes with up to 500,000 Security Equipment duty cycles* Compliant with UL, RoHS and REACH requirements PRODUCT SPECIFICATIONS TYPICAL CHARACTERISTICS ELECTRICAL THERMAL Rated Voltage, V 2.7 VDC Typical Thermal Resistance R 60C/W 8 1 (R , Housing) Surge Voltage 2.85 VDC th 3 Typical Thermal Capacitance (C ) 2.0 J/C Rated Capacitance, C 5 F th Usable Continuous Current (BOL) Min. / Max. Capacitance, 2.3 A 8,10 4.5 F / 6.0 F (T = 15 C) Initial 2,3 Usable Continuous Current (BOL) Typical Capacitance, Initial 5.17 F 3.8 A 8,10 (T = 40 C) 3 Rated (Max.) ESR , Initial 45 m DC LIFE* 2,3 Typical ESR , Initial 36 m DC Projected DC Life at Room 2,3 Typical ESR , Initial, 5 sec 70 m DC 10 years Temperature 4 10 Maximum Leakage Current 8 A (At rated voltage and 25C, EOL ) Maximum Peak Current, DC Life at High Temperature 5.5 A 1,500 hours 5 10 Non-repetitive (At rated voltage and 65C, EOL ) DC Life at De-rated Voltage & Higher PHYSICAL 1,500 hours Temperature Nominal Mass 2.1 g 10 (At 2.3V and 85C, EOL ) POWER & ENERGY Projected Cycle Life at Room 7 Temperature Operating Temp. Standard (-40C Extended (-40C to 500,000 cycles (Constant current charge-discharge from V to R Range to 65C) at 2.7 V 85C) at 2.3 V 10 1/2V at 25C, EOL ) R Maximum Stored 5.0 mWh 3.6 mWh Shelf Life 6,9 4 years Energy, E max (Stored uncharged at 25C, 50% RH) Gravimetric 2.4 Wh/kg 1.7 Wh/kg 6 Specific Energy Usable Specific 9.2 kW/kg 6.7 kW/kg 6 Power Impedance Match 19.2 kW/kg 14.0 kW/kg 6 Specific Power SAFETY RoHS, REACH, Certifications UL 810A *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details for applicable operating and use requirements. Page 1 Document number: 3001974-EN.3 maxwell.com Datasheet: 2.7V 5F ULTRACAPACITOR CELL 1. Surge Voltage V R Absolute maximum voltage, non-repetitive. Duration not to exceed 1 second. I = t / C + ESR DC where t is the discharge time (sec) t = 1 sec in this case. 2. Typical values represent mean values of production sample. The stated maximum peak current should not be used in normal operation 3. Rated Capacitance & ESR (measure method) DC and is only provided as a reference value. Capacitance: Constant current charge (10 mA/F) to V , 5 min hold at V , R R constant current discharge 10 mA/F to 0.1V. 6. Energy & Power (Based on IEC 62391-2) e.g. in case of 2.7V 5F cell, 10 * 5 = 50 mA ESR : Constant current charge (10 mA/F) to V , 5 min hold at V , constant 2 CV DC R R R Maximum Stored Energy, E (Wh) = current discharge (40 * C * V mA ) to 0.1 V. max 3,600 R e.g. in case of 2.7V 5F cell, charge with 10 * 5 = 50 mA and discharge with 40 * E max Gravimetric Specific Energy (Wh/kg) = 5 * 2.7 = 540 mA mass 2 0.12V R Usable Specific Power (W/kg) = ESR x mass DC 2 0.25V R Impedance Match Specific Power (W/kg) = ESR x mass DC Presented Power and Energy values are calculated based on Rated Capacitance & Rated (Max.) ESR , Initial values. DC 7. Cycle Life Test Profile Cycle life varies depending upon application-specific characteristics. Actual I x (t -t ) V 2 1 results will vary. C = ESR = V -V DC 1 2 I where C is the capacitance (F) 8. Temperature Rise at Constant Current 2 I is the absolute value of the discharge current (A) T=I x ESR x R RMS DC th V is the rated voltage (V) R V is the measurement start voltage, 0.8V (V) 1 R where T: Temperature rise over ambient (C) V is the measurement end voltage, 0.4V (V) 2 R I : Maximum continuous or RMS current (A) RMS t is the time from start of discharge to reach V (s) 1 1 R : Thermal resistance, cell to ambient (C/W) th t is the time from start of discharge to reach V (s) 2 2 ESR : Rated (Max.) ESR (). DC DC ESR is the DC-ESR () DC (Note: Design should consider EOL ESR for application temperature rise DC V is the voltage drop during first 10ms of discharge (V). evaluation.) Typical ESR , Initial, 5 sec tested per Maxwell Application Note, Test Procedures DC 9. Per United Nations material classification UN3499, all Maxwell ultracapacitors for Capacitance, ESR, Leakage Current and Self-Discharge Characterizations of Ultracapacitors available at www.maxwell.com. have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those 4. Maximum Leakage Current ultracapacitors shipped by Maxwell can be transported without being treated as Current measured after 72 hrs at rated voltage and 25C. Initial leakage current dangerous goods (hazardous materials) under transportation regulations. can be higher. If applicable, module leakage current is the sum of cell and balancing circuit 10. BOL: Beginning of Life, rated initial product performance leakage currents. EOL: End of Life criteria. Capacitance: 80% of min. BOL rating 5. Maximum Peak Current ESR : 2x max. BOL rating DC Current needed to discharge cell/module from rated voltage to half-rated voltage in 1 second. BCAP0005 P270 S01 Dimensions (mm) L D d H1 H2 A Part Description (1.0) (+0.5) (0.05) (min.) (min.) (0.5) BCAP0005 P270 S01 20.5 10.0 0.60 15.0 19.0 5.0 When ordering, please reference the Maxwell Model Number below. Maxwell Model Number: Maxwell Part Number: Alternate Model Number: BCAP0005 P270 S01 133514 ESHSR-0005C0-002R7 The information in this document is correct at time of printing and is subject to change without notice. Images are not to scale. Products and related processes may be covered by one or more U.S. or international patents and pending applications. Please see www.maxwell.com/patents for more information. Maxwell Technologies, Inc. Maxwell Technologies SA Maxwell Technologies, Maxwell Technologies Nesscap Co., Ltd. Shanghai Trading Co., Ltd. 17, Dongtangiheung-ro Global Headquarters Route de Montena 65 GmbH Room 1005, 1006, and 1007 681 Beon-gil, Giheung-gu, 3888 Calle Fortunada CH-1728 Rossens Leopoldstrasse 244 No. 1898, Gonghexin Road, Yongin-si, Gyeonggi-do 17102 San Diego, CA 92123 Switzerland 80807 Munich Jin An District, Shanghai 2000072, Republic of Korea USA Tel: +41 (0)26 411 85 00 Germany P.R. China Tel: +82 31 289 0721 Tel: +86 21 3852 4000 Fax: +82 31 286 6767 Tel: +1 (858) 503-3300 Fax: +41 (0)26 411 85 05 Tel: +49 (0)89 4161403 0 Fax: +82 21 3852 4099 Fax: +1 (858) 503-3301 Fax: +49 (0)89 4161403 99 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGYS FUTURE, DURABLUE, NESSCAP, XP, BOOSTCAP, D CELL, CONDIS and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc., and/or its affiliates, and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright 2018 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 2 Document number: 3001974-EN.3 maxwell.com