90V 10F Module Datasheet FEATURES Rated voltage of 90V and capacitance of 10F High performance module with low ESR Designed for indoor cabinet environment Long lifetimes with up to 500,000 duty cycles* Integrated UMU (Ultracapacitor Management Unit) for - Individual cell balancing - Voltage and temperature monitoring - Reverse polarity detection Typical applications: - Wind turbine pitch control system - Industrial UPS and DVR * Image is not to scale. BMOD0010 P090 B02 ELECTRICAL SPECIFICATIONS EMHSR-0010C0-090R0C1 Rated Voltage, V 90 V R DC 1 Surge Voltage 102 V DC 2 Rated Capacitance, C 10 F Min. / Max. 0% / +20% Capacitance Tolerance 4 Average +3% / +10% Max. 138 m 3 Initial DC-ESR, R DC 4 Average 115 m 5 Typical Leakage Current At 2.5V per cell 26 mA 6 Maximum Peak Current, Non-repetitive 100 A 7 Maximum Stored Energy, E 11.2 Wh max 7 Gravimetric Specific Energy 1.7 Wh/kg 7 Usable Specific Power 1.0 kW/kg 7 Impedance Match Specific Power 2.2 kW/kg TEMPERATURE SPECIFICATIONS Operating Temperature Range -40 ~ 65C Storage Temperature Range (stored without charge) -40 ~ 70C TYPICAL LIFETIME CHARACTERISTICS* 8 DC Life at High Temperature (at V and 65C) 1,500 hours R 8 Projected DC Life at Room Temperature (at V and 25 10C) 10 years R 8 Projected Cycle Life 500,000 cycles (constant current charge-discharge from V to 1/2V at 25 10C) R R Shelf Life (stored without charge at 25 10C) 4 years PHYSICAL SPECIFICATIONS 2 Output Terminals 10mm Ferrules-type terminal block IEC 61287-1 (Category: OV II) Insulation Coordination Rated insulation voltage: 1kV DC or 2.8kV AC (at 50Hz, 10 sec) Rated impulse withstand voltage: 6kV DC IEC 60529 IP 30 Protection Degree Protected against solid foreign objects more than 2.5 mm diameter Vibration SAE J2380 Shock SAE J2464 *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details for applicable operating and use requirements. Page: 1 3001966-EN.1 90V 10F Module Datasheet UMU / MONITORING SPECIFICATIONS Cell Balancing Passive single cell balancing Voltage Monitoring High and low over-voltage logic signal (5V) via external power source Temperature Monitoring High and low over-temperature logic signal (5V) via NTC thermistor Signal Output 5-pin connector SAFETY & ENVIRONMENTAL SPECIFICATIONS RoHS Compliant REACH Cell-level compliant UL Cell-level compliant DRAWING DIMENSION & WEIGHT Length (2.5) Width (2.0) Height (2.5) Nominal Weight 292.0 mm 116.0 mm 282.6 mm 6.5 kg Page: 2 3001966-EN.1