Model 50-14860 Infrared Connecting Block Instruction Manual connects IR re- The Stellar Labs Connecting Block IR Receiver In: This is a three terminal 1/8 plug that is ceivers, power supply and emitters, together to interface common to many of the free standing IR receivers. This the IR system to the audio / video components. will connect the power, ground and signal. Signal is Tip, ground is the ring and power is the sleeve. FEATURES 1. Six emitter output connections. 2. Convenient IR confirmation LED. 3. Status power receptacle with LED indicator. 4. Power receptacle with LED indicator. 5. Three conductor 1/8 receptacle for interfacing with many brands of freestanding IR receivers. 6. Large detachable IR receiver connection. 7. Compact size for mounting near audio equipment. SPECIFICATIONS Dimensions: 82W x 60H x 27D mm Weight: 110g INSTRUCTIONS Power: Connect a 12 VDC 200mA to 1A power supply to System Connection: Connect the IR system to the the power jack. 2.1mm + Tip sleeve. The red LED will by detachable connector labled +12VDC, GND, STATUS, illuminated when powered. This will power all of the IR and SIGNAL. components connected to the system. Depending on the type of components and the number of components will determine how much current the power supply will need to provide. Status Power: 12VDC 200mA 2.1mm + Tip sleeve. Emitter Outputs: Connect up to 6 emitters (A-1141 or Connecting a power supply to this connection will power A-1142) to the emitter jacks labeled 1-6. Place the emitters the status connection. The green LED will be illuminated on the source equipment. when powered. This can be from a 12 volt trigger output or from a wall type power supply plugged into a switched outlet of a stereo receiver. If you are using products like the A-1140 that have a status indicator, simply plug a 12 VDC power supply into the switched outlet and when the receiver is turned on the status LED will be illuminated. IR Confirm: When an IR signal is received the IR confirmation blue LED will flash. Mounting: Mount the A-1139 near the source equipment Stellar Labs that the emitters are attached to. Model 50-14860 Distributed Exclusively by: MCM Electronics www.mcmelectronics.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for mcm manufacturer: Other Similar products are found below : NWTBATCAPMB13 27-505 27-4200 27-840 28-5958 50-10820 28-1510 27-5918 27-5977 24-12352 287-14020 28-6023 35SPS-3 28- 6008 21-4605 21-4575 21-19084 21-12825 27-570 28-1525 83-17604 27-5833 27-6020 24-12345 28-6017 28-6032 21-18966 30-1530 28-970 27-560 26-120 CA68B 24-12344 28-6005 24-13075 PCM-2100-50 21-18956 28-6080 24-5360 24-1040 27-5917 28-6031 HD15MM35N-100F 28-975 27-4270 85-11102 27-5940 27-5949 27-6112 HD15MM35N-6F