50-14895 MCM

Model 50-14895 Model 50-14890 and 50-14895 IR Distribution Over Coax Instruction Manual The-IR-over-coaxial-cable system allows an IR Injector and IR coupler to work together to insert an IR signal into an existing coaxial cable. This allows source components to be controlled from a remote location, without having to run additional cable. Note that this instruction sheet covers use of the Model 50-14895 IR coupler and Model 50-14890 IR injector, both sold separately. It also references multiple other optional or required components, all of which are available separately. Features Creates an IR system with existing wiring Power 4 IR receivers with one power supply Quick and easy installation IR repeating concepts Most people are familiar with Infra-Red remote controls because they use them to operate their TV and other devices on a daily basis. However, some people may not be familiar with IR repeating. IR repeating allows the user to control devices which are not with in the direct line of sight of the remote control. This is most commonly used in distributed audio/video systems where the source components are centrally located. Basic IR Setup A basic IR system is often used when an audio/video signal is distributed to a remote TV location using an RF modulator. The IR INJECTOR is located near the TV, providing a connection for an IR receiver, and the IR COUPLER is located near the audio/video source, providing an IR emitter output. Model 50-14890 Model 50-14877 Model 50-14870