555-15457 MCM

Assembly Guide These durable 19 equipment racks are solid steel and feature enclosed side panels with proper venting. These cases are available in three sizes, 8U,12U, and 16U. These are heavy-duty racks with 3 casters that feature locking front wheels. 555-15457 - 12U Parts List Cage Nuts x 52 3 Casters x 4 (2 Locking) Wrench x 1 Screws x 68 Support Brackets x 8 Hex Key x 1 Screw Covers x 8 Thread the 3 casters onto the bottom panel which has the externally mounted rails, tighten them with the supplied wrench Place the side panels into the bottom panel with the holes on the bottom aligned. Insert the screws through the bottom and thread the nuts on via the opposing side. Tighten the screws using the supplied hex key. Place the top panel on top of the side panels with the holes on both panels aligned. Insert the screws from the top and thread the nuts on via the opposing side.Place cap covers over the screw holes on both the top and the bottom. Insert cage nuts from the rear of the rack rail to fit your mounting needs. (The remaining screws can be used to thread into the cage nuts for equipment mounting purposes. Dimensions (WxDxH): 21.6 x 17.25 x 26.3 For more rack equipment and accessories please visit our website at www.mcmelectronics.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for MCM manufacturer: Other Similar products are found below : NWTBATCAPMB13 25-020 27-505 27-4155 27-840 28-0755 28-5958 50-10820 37-330 PI-UPTIMEUPS 27-5918 27-5977 12-3410 28- 6023 55-3230 35SPS-3 28-6008 22-26180 17705 55-5675 27-6020 24-12352 21-7655 28-6017 53-1230 28-5965 21-18966 22-1640 27- 4200 83-17607 27-5833 27-5925 24-12344 12-3404 PCM-2100-50 21-19004 28-6080 22-665 24-1040 27-5917 28-6005 55-5670 HD15MM35N-100F 21-4605 21-12825 24-5360 27-4270 27-5940 27-5949 27-6112