NRND 75W Single Output LED Power Supply CEN-75 series F e a t u r e s : Universal AC input / Full range (up to 295VAC) Protections: Short circuit / Over current / Over voltage / Over temperature Output voltage and constant current level adjustable Built-in active PFC function IP66 design for indoor or outdoor installations Class 2 power unit Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 3 years warranty IS 15885(Part 2/Sec13) Bauar t gepruft Sicherheit THOMAS SAMUEL THOMAS SAMUEL egel ma ge od o s 110 be wac g M M SELV I P 6 6 www.tuv.com R-41027766 ID 2000000000 ( C C C o p t i o n a l ) ( f o r 3 6 V , 4 8 V , 5 4 V o n l y ) SPECIFICATION MODEL CEN-75-15 CEN-75-20 CEN-75-24 CEN-75-30 CEN-75-36 CEN-75-42 CEN-75-48 CEN-75-54 DC VOLTAGE 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.5 11.25 ~ 15V 15 ~ 20V 18 ~ 24V 22.5 ~ 30V 27 ~ 36V 31.5 ~ 42V 36 ~ 48V 40.5 ~ 54V RATED CURRENT 5A 3.75A 3.15A 2.5A 2.1A 1.8A 1.57A 1.4A CURRENT RANGE 0 ~ 5A 0 ~ 3.75A 0 ~ 3.15A 0 ~ 2.5A 0 ~ 2.1A 0 ~ 1.8A 0 ~ 1.57A 0 ~ 1.4A RATED POWER 75W 75W 75.6W 75W 75.6W 75.6W 75.36W 75.6W RIPPLE & NOISE (max.) Note.2 2.7Vp-p 2Vp-p 2.7Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p OUTPUT VOLTAGE ADJ. RANGE (SVR1) 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.75 ~ 5A 2.81 ~ 3.75A 2.36 ~ 3.15A 1.88 ~ 2.5A 1.58 ~ 2.1A 1.35 ~ 1.8A 1.18 ~ 1.57A 1.05 ~ 1.4A VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% LOAD REGULATION 5.0% SETUP TIME 500ms / 230VAC 1200ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.9/277VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading75% at 115VAC/230VAC input and output loading80% at 277VAC input INPUT EFFICIENCY (Typ.) 87% 88% 89% 90% 90% 90% 91% 91% AC CURRENT (Typ.) 1.1A/115VAC 0.55A/230VAC 0.4A/277VAC INRUSH CURRENT (Typ.) COLD START 45A(twidth=85s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 25 units (circuit breaker of type B) / 25 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT 17.5 ~ 21V 22.8 ~ 26V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 52V 54 ~ 60V 59 ~ 65V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL879, UL8750, CSA C22.2 No. 207-M89, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP66, J61347-1, J61347-2-13, SAFETY STANDARDS BIS IS15885(for 36V,48V,54V only), EAC TP TC 004,GB19510.1,GB19510.14 approved SAFETY & I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE EMC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (75% load) EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria B, EAC TP TC 020 MTBF 522.2Khrs min. MIL-HDBK-217F (25) DIMENSION 185*62.5*40.5mm (L*W*H) OTHERS 0.6Kg 24pcs/15.4Kg/1.29CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Please refer toDRIVING METHODS OF LED MODUL. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. 9.The ambient temperature derating of 3.5 /1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:CEN-75-SPEC 2018-05-15NRND 75W Single Output LED Power Supply CEN-75 series Mechanical Specification Case No.993B Unit:mm 185 10.5 164 7.6 30020 30020 Vo Io T case AC/L(Brown) 81 ADJ. ADJ. +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG3C SVT 18AWG 2C 4.6 4PL T case: Max. Case Temperature. Block Diagram fosc : 50KHz(115VAC) 75KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 (HORIZONTAL) -30 -25 -5 0 15 30 50 60 70 90 100 125 135 145 155 165 175 180 200 230 295 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:CEN-75-SPEC 2018-05-15 LOAD (%) 30.6 45 62.5 31.25 LOAD (%) 40.5