60W Dual Output Switching Power Supply D-60 series Features : Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on Fixed switching frequency at 54KHz 2 years warranty SPECIFICATION MODEL D-60A D-60B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 4A 3A 3A 1.8A CURRENT RANGE 0.3 ~ 6A 0.2 ~ 4A 0.3 ~ 6A 0.2 ~ 2.2A RATED POWER 56W 58W RIPPLE & NOISE (max.) Note.2 75mVp-p 150mVp-p 75mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE CH1 : 4.75 ~ 5.5V CH1 : 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 6.0% 2.0% 5.0% LINE REGULATION 0.5% 1.0% 0.5% 0.5% LOAD REGULATION 0.5% 4.0% 0.5% 4.0% SETUP, RISE TIME 300ms, 50ms / 230VAC 800ms, 50ms / 115VAC at full load HOLD UP TIME (Typ.) 80ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 73% 76% INPUT AC CURRENT (Typ.) 2A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed. PROTECTION 5V : 5.75 ~ 6.75V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed. WORKING TEMP. -10 ~ +60 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -20 ~ +85 , 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) on +5V output VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1012, UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 301.2K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 159*97*38mm (L*W*H) PACKING 0.54Kg 24pcs/13.8Kg/0.75CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on 3.5 3-M3 60W Dual Output Switching Power Supply D-60 series Mechanical Specification Case No. 901 Unit:mm 152.5 1 2 3 4 5 6 7 4.5 24 78 159 6.5 150 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 AC/L 4 DC OUTPUT +V2 2 AC/N 5 DC OUTPUT +V1 3 6,7 DC OUTPUT COM FG 22 117 Block Diagram fosc : 54KHz RECTIFIERS +V2 & FILTER RECTIFIERS RECTIFIERS EMI POWER +V1 I/P & & FILTER SWITCHING COM FILTER FILTER DETECTION FG CIRCUIT PWM O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics (B) 25 5.2 300 100 +5V 24 5.0 250 +24V 80 23 4.8 200 60 22 4.6 150 21 4.4 100 40 20 4.2 50 +24V 20 19 4.0 25 +5V -10 0 10 20 30 40 50 60 (VERTICAL) 60 80 100 120 140 160 180 200 220 240 264 (HORIZONTAL) -10 0 45 55 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:D-60-SPEC 2011-06-17 3.5 2-M3 LOAD (%) 8.2 9.5 9 18.5 65 18 9 OUTPUT VOLTAGE (V) 3.5 3.5 28.5 84.5 7 38 97 OUTPUT RIPPLE (mVp-p)