3200W Power Supply with Single Output DPU-3200 series = , = Bauart gepruft Sicherheit 6&%8 = )+< = ) -) / egelma ge od os be wac g www.tuv.com ID 2000000000 )6%8 = = )%*)-) / %6) / 1 0 2942:9 *6 *8 ) 93 0 94 &&+ 6 2 &&+6 %& ( )*+++, - .)/ 0 1 2 ( 2 ( 2 ( ( ( 3 4 & 5 6++ %6>, 2 5 5 ) 5 5 <,2 % + 6* 7 5 % 9 % 3 6++ A B (4 ( A 5 % ( -6 72 87/ ( 5 1 4 C 4 : 1 C 3 3 B 4 4 B File Name:DPU-3200-SPEC 2018-10-183200W Power Supply with Single Output DPU-3200 series SPECIFICATION MODEL DPU-3200-24 DPU-3200-48 DC VOLTAGE 24V 48V RATED CURRENT 133A 67A CURRENT RANGE 0 ~ 133A 0 ~ 67A RATED POWER 3192W 3216W RIPPLE & NOISE (max.) Note.2 300mVp-p 480mVp-p OUTPUT VOLTAGE ADJ. RANGE 23.5 ~ 30V 47.5 ~ 58.8V VOLTAGE TOLERANCE Note.4 1.0% 1.0% LINE REGULATION 0.5% 0.5% LOAD REGULATION 0.5% 0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms / 230VAC at 75% load 9ms / 230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC at full load EFFICIENCY (Typ.) Note.6 93.5% 94.5% INPUT 17A/230VAC AC CURRENT (Typ.) Note.5 INRUSH CURRENT (Typ.) COLD START 55A/230VAC LEAKAGE CURRENT <2mA / 230VAC 105 ~ 115% rated output power OVERLOAD Protection type : Constant current limiting, shut down O/P voltage 5 sec. after O/P voltage is down low, re-power on to recover 31.5 ~ 37.5V 63 ~ 75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down Adjustment of output voltage is allowable to 50 ~ 125% of nominal output voltage OUTPUT VOLTAGE PROGRAMMABLE(PV) Please refer to the Function Manual in following pages CONSTANT CURRENT LEVEL PROGRAMMABLE(PC) Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual in following pages REMOTE ON-OFF CONTROL By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual in following pages FUNCTION Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual in following pages REMOTE SENSE 5V 0.3A, tolerance10%, ripple 150mVp-p, 12V 0.8A, tolerance 10%, ripple 450mVp-p AUXILIARY POWER Isolated TTL signal output for T-Alarm and DC-OK. Please refer to the Function Manual in following pages ALARM SIGNAL -30 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL62368-1, TUV EN62368-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted EN55032 (CISPR32) / EN55011 (CISPR11) Class B EMC EMISSION Radiated EN55032 (CISPR32) / EN55011 (CISPR11) Class A Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC (Note 9) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 3, 8KV air Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-6-2 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 168K hrs min. Telcordia SR-332 (Bellcore) 44.9K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 325.8*107*41mm (L*W*H) 2.76Kg 4pcs/12Kg/0.81CUFT PACKING )% 4( 6 +7 6& % NOTE 6% D 6+3 E 5 )6F 5 5 5 +%) D < % % 1 9 % : 5 C & % % 0 % &% 5 % C % *% <& % <% : 7 G 7 7 % 8% , 6 1 - / % 5 - / % % 5 5 5 B % 93 A *++ = ++ 5 ) C % B 93 % 5 93 H93: 5 %I - 022555% 5 % / )+% %&2)+++ 5 & 2)+++ 5 6+++ -*&++ /% File Name:DPU-3200-SPEC 2018-10-18