65W Single Output Switching Power Supply EPS-65S series Users Manual Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 TPTC004 UL62368-1 BS EN/EN62368-1 IEC62368-1 BS EN/EN60335-1 Features 3 2 miniature size Industrial electrical equipment Universal AC input / Full range Mechanical equipment Class (without FG) installations Factory automation equipment No load power consumption<0.1W Handheld electronic device High efficiency up to 91% For 1U applications Protections: Short circuit / Overload / Over voltage Cooling by free air convection -30~70wide range of operating temperature LED indicator for power on 3 years warranty Description EPS-65S is a 65W highly reliable green PCB type industrial power supply with a high power density on the 3 by 2 footprint. It accepts 80~264VAC input and offers various output voltages between 3.3V and 48V. The working efficiency is up to 91% and the extremely low no load power consumption is down below 0.1W. EPS-65S is able to be used for Class(no FG) system design. File Name:EPS-65S-SPEC 2021-11-0865W Single Output Switching Power Supply EPS-65S series SPECIFICATION ORDER NO. EPS--65S 3.3 EPS--65S 5 EPS--65S 75. EPS--65S 12 EPS--65S 15 EPS--65S 24 EPS--65S 48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 48V RATED CURRENT 10A 10A 8A 5.42A 4.34A 2.71A 1.36A CURRENT RANGE 0 ~ 11A 0 ~ 11A 0 ~ 8.8A 0 ~ 5.96A 0 ~ 4.77A 0 ~ 2.98A 0 ~ 1.49A RATED POWER 33W 50W 60W 65W 65.1W 65W 65.3W OUTPUT PEAK LOAD(10sec.) Note.2 36.3W 55W 66W 71.5W 71.6W 71.5W 71.5W RIPPLE & NOISE (max.) Note.3 80mVp-p 80mVp-p 80mVp-p 120mVp-p 150mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ.RANGE 2.9~3.6V 47.~.V55 7.12~8.3V 11.4~13.2V 13.5~16.5V 22.8~27.6V 45.6~52.8V 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.4 LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 30ms / 230VAC 12ms / 115VAC at full load VOLTAGE RANGE Note.5 80 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 80% 84% 85% 88% 89% 90% 91% AC CURRENT (Typ.) 1.5A / 115VAC 1A / 230VAC INRUSH CURRENT (Typ.) OLD STAR 30A/115VAC 50A/230VAC LEAKAGE CURRENT(max.) 0.25mA/264VAC 115 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.8~4.46V 5.75~6.75V 8.62~11.3V 13.8~16.2V 17.25~20.25V 27.6~32.4V 55.2~64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -30 ~ +70 (Refer toDerating Curv) 20% ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% /(0 ~ 50 ) OPERATING ALTITUDE Note.6 5000 meters VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368- 1, BS EN/EN60335-1, EAC TP TC 004 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P: 3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC (Note. 7) EMC EMISSION Compliance to BS EN//EN55032(CISPR32) Class B, BS EN EN61000-3-2,3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN//EN61000-4-2,3,4,5,6,8,11, BS EN EN55024, Heavy industry Level criteria A, EAC TP TC 020 MTBF 959.1Khrs min. MIL-HDBK-217(25) DIMENSION 76.2*50.8*24mm or 3 * 2 *0.945 inch (L*W*H) OTHERS 0.11Kg 120pcs/14.2Kg/0.94CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power. (as available on