10 ~ 12W AC-DC Single Output Wall-mounted type G S12U s e ri e s Features : Universal AC input / Full range No load power consumption< 0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over Voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / BSMI / CB / FCC Pass LPS for full series 2 years warranty SPECIFICATION ORDER NO. GS12U05-P1I GS12U07-P1I GS12U09-P1I GS12U12-P1I GS12U15-P1I GS12U18-P1I GS12U24-P1I SAFETY MODEL NO. GS12U05 GS12U07 GS12U09 GS12U12 GS12U15 GS12U18 GS12U24 DC VOLTAGE 5V 7.5V 9V 12V 15V 18V 24V RATED CURRENT 2.0A 1.6A 1.33A 1.0A 0.8A 0.67A 0.5A CURRENT RANGE 0 ~ 2.0A 0 ~ 1.6A 0 ~ 1.33A 0 ~ 1.0A 0 ~ 0.8A 0 ~ 0.67A 0 ~ 0.5A RATED POWER 10W 12W 12W 12W 12W 12.06W 12W OUTPUT RIPPLE & NOISE (max.) Note.2 75mVp-p 90mVp-p 90mVp-p 120mVp-p 150mVp-p 180mVp-p 200mVp-p VOLTAGE TOLERANCE Note.3 5.0% 4.0% 4.0% 3.0% 3.0% 3.0% 3.0% LINE REGULATION Note.4 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.5 5.0% 4.0% 4.0% 3.0% 3.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 500ms, 20ms, 10ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 76% 78.5% 78.5% 78.5% 80% 80% 80.5% INPUT AC CURRENT 0.31A / 115VAC 0.16A / 230VAC INRUSH CURRENT (max.) COLD START 25A / 115VAC 45A / 230VAC LEAKAGE CURRENT (max.) 0.25mA / 240VAC >105% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% PROTECTION OVER VOLTAGE Protection type : Clamp by zener diode U1 Tj 140 typically (U1) Detect on main control IC OVER TEMPERATURE Note.6 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. 0 ~ +50 (Refer toDerating Curv) WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / (0 ~ 40 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, CSA22.2, BSMI CNS14336 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMC EMISSION Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B MTBF 1414.6Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 65*47*26.5mm (L*W*H) 0.15Kg 100pcs / 16Kg / CARTON PACKING Standard type P1I: 2.1 * 5.5 * 9.5mm turning fork type, center positive for stock Other type available by customer requested PLUG CONNECTOR CABLE Standard type UL1185 6ft (4FT only for 5V output) for stock Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. NOTE 2.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% rated load. 6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:GS12U-SPEC 2011-06-1410 ~ 12W AC-DC Single Output Wall-mounted type G S12U s e ri e s Mechanical Specification Unit:mm UL1185 16AWG 1230 50mm for 5V~9V UL1185 18AWG 1830 50mm for 12V~24V 30 10mm 6.3 0.3 65 1 ID 2.1 x OD 5.5 9.5 0.5mm Plug Assignment Standard plug: P1I P1I P/N OUTPUT 1.5 0.2 CENTER + 12.7 0.4 Derating Curve Static Characteristics(24V) 32 300 28 250 100 24 200 70 20 150 16 100 12 50 25 8 0 10 20 30 40 50 50 70 90 110 120 140 160 180 200 220 240 264 Ta ( ) INPUT VOLTAGE(VAC)60Hz File Name:GS12U-SPEC 2011-06-14 LOAD (%) 47 1 17 1 26.5 1 OUTPUT VOLTAGE (V) OUTPUT RIPPLE (mVp-p)