25W AC-DC Single Output Medical Adaptor G SM 25E series EN 60601-1 IEC 60601-1 8 Features Applications Universal AC input / Full range Blood glucose meter 2 pole EURO plug Blood pressure meter High efficiency up to 88% Nebulizer Low leakage current <50 A Inhaler Protections: Short circuit / Overload / Over voltage Portable medical device Fully enclosed plastic case Medical safety approved (2 MOPP between primary to secondary) Class power (without earth pin) LED indicator for power on No load power consumption<0.1W ErP step2 compliant (level ) Meet EISA 2007 (Energy Independence and Security Act) Optional lock type DC plug 3 years warranty Description GSM25E is a highly reliable, 25W single-output green medical adaptor series. This product is equipped with a 2-pin (no FG) standard European power plug, adopting the input range from 80VAC to 264VAC. The entire series supplies different output voltages between 5VDC and 48VDC that can satisfy the demands for various kinds of miniature medical devices. The circuitry design meets the international medical standards (2 MOPP), having an ultra low leakage current (<50 A), fitting the medical devices in direct electrical contact with the patients. With the efficiency up to 88% and the extreme low no-load power consumption below 0.1W, the design of GSM25E observes the latest energy regulation (level V) the supreme feature allows the adaptor to save the energy when it is either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic case, providing the double insulation that effectively prevents electrical shock. GSM25E is approved with the international medical safety certificates. Model Encoding GSM25E05-P1J Standard : P1J (without lock) DC plug type Optional : P2S (lock type) Output voltage European 2 pin AC inlet Output wattage Series name File Name:GSM25E-SPEC 2014-01-0225W AC-DC Single Output Medical Adaptor G SM 25E series SPECIFICATION ORDER NO. GSM25E05-P1J GSM25E07-P1J GSM25E09-P1J GSM25E12-P1J GSM25E15-P1J GSM25E18-P1J GSM25E24-P1J GSM25E48-P1J SAFETY MODEL NO. GSM25E05 GSM25E07 GSM25E09 GSM25E12 GSM25E15 GSM25E18 GSM25E24 GSM25E48 DC VOLTAGE Note.2 5V 7.5V 9V 12V 15V 18V 24V 48V RATED CURRENT 4A 2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.52A CURRENT RANGE 0 ~ 4A 0 ~ 2.93A 0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A 0 ~ 1.38A 0 ~ 1.04A 0 ~ 0.52A RATED POWER (max.) 20W 22W 25W 25W 25W 25W 25W 25W OUTPUT RIPPLE & NOISE (max.) Note.3 60mVp-p 80mVp-p 80mVp-p 120mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 6.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 6.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% SETUP, RISE TIME Note.6 500ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 16ms / 230VAC 16ms / 115VAC at full load VOLTAGE RANGE 80 ~ 264VAC 113 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% 83% 84% 86% 86% 86% 87% 88% INPUT AC CURRENT (Typ.) 0.7A / 115VAC 0.35A / 230VAC INRUSH CURRENT (Typ.) 55A / 230VAC 30A / 115VAC LEAKAGE CURRENT(max.) Touch current < 50 A/264VAC 105 ~ 170% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.25 ~ 7.5V 7.88 ~ 10.5V 9.45 ~ 13V 12.6 ~ 17.2V 15.75 ~ 20.25V 18.9 ~ 25.2V 25.2 ~ 32.4V 50.4 ~ 64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -25 ~ +60 (Refer toDerating Curv) 20% ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / (0~40) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60601-1 / 60601-1-11 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:4KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC (Note. 7) EMC EMISSION Compliance to EN55011(CISPR11) class B, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3 medical level, criteria A EMC IMMUNITY MTBF 796.7K hrs min. MIL-HDBK-217F(25) DIMENSION 79*54*33mm (L*W*H) OTHERS PACKING 230g 60pcs / 14.8Kg / CARTON PLUG Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock Other type available by customer requested CONNECTOR CABLE See page 2 1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. NOTE 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on