150W Single Output Switching Power Supply HEP-150 series 6 8 IP65 IP68 5 5 ) * 6 7 )8 9 % ) - -- , 012 - - , , - % :34 - % < = , ( & > * * * 6 08 , , %& & ( )*+) , - , , , , % . - , % . / % -% % / -- , 012 %& - , / % 34 - I 9 / - A File Name:HEP-150-SPEC 2016-02-18150W Single Output Switching Power Supply HEP-150 series SPECIFICATION MODEL HEP-150-12 HEP-150-15 HEP-150-24 HEP-150-36 HEP-150-48 HEP-150-54 DC VOLTAGE 12V 15V 24V 36V 48V 54V RATED CURRENT 12.5A 10A 6.3A 4.2A 3.2A 2.8A RATED POWER 150W 150W 151.2W 151.2W 153.6W 151.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V 13.5 ~ 17V 22 ~ 27V 33 ~ 40V 43 ~ 53V 49 ~ 58V Can be adjusted by internal potentiometer for A type only OUTPUT CURRENT ADJ. RANGE 7.5 ~ 12.5A 6 ~ 10A 3.8 ~ 6.3A 2.5 ~ 4.2A 1.92 ~ 3.2A 1.68 ~ 2.8A VOLTAGE TOLERANCE Note.3 2.5% 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.7 1000ms,50ms/115VAC 500ms,50ms/230VAC at full load HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.4 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load INPUT EFFICIENCY (Typ.) 91.5% 92% 93% 93.5% 94% 94% AC CURRENT (Typ.) 1.7A / 115VAC 0.75A / 230VAC 0.7A / 277VAC INRUSH CURRENT(Typ.) COLD START 65A at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC 105 ~ 125% OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 14 ~ 17V 18 ~ 21V 28 ~ 34V 41 ~ 46V 54 ~ 63V 59 ~ 65V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE -55 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -60 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.6 UL60950-1, IP65 (or IP68 for HEP-150 Blank type) approved design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A MTBF 164.1K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 228*68*38.8mm (L*W*H) 1.15Kg 12pcs/14.8Kg/0.8CUFT PACKING & . , B7 ) B - NOTE B C D B < E - , &BF % & - D 14 - 7 . 1 + , / - , , - , <) - 0 %& ) & B77 >94 & )) & 4 G - - . * , , - . , - <) - -- , - - % -, <) + 0 . - 7 *& - B 6 - 8 & . - - & - - - & File Name:HEP-150-SPEC 2016-02-18