600W Single Output Switching Power Supply HEP-600 se rie s Ba uar t gep r uf t Si c he rh ei t eg e l ma ge od o s b e w a c g w w w. tu v.co m ID 2 0000 0000 0 5 Features Applications Universal AC input / Full range Humid and dusty industrial environment Built-in active PFC function Outdoor telecommunication equipment No load power consumption <0.5W at remote OFF No fan environment High efficiency up to 96% Signboard or billboards Fanless design, cooling by free air convection Output voltage and output current can be adjusted through internal potentiometer Aluminum case and filling with heat-conducted glue -40 ~ +70 wide operating range Withstand 300VAC surge input for 5 seconds Withstand 5G vibration test Protections: Short circuit / Over current / Over voltage / Over temperature LED indicator for power on 5 years warranty (Note.7) Description HEP-600 series is a high-efficiency and waterproof AC-to-DC industrial power supply up to 600W, fully potted by silicone and enclosed with the aluminum case. With state of the art design, HEP-600 works outstandingly with electronics under harsh environment: fan-less, high-vibration, dusty, humid, and oily environment. Remarkable features include supreme efficiency up to 96%, low no-load power consumption (<0.5W) at remote OFF, and wide working temperature ranges between -40 and +70. Model Encoding HEP - 600 - 12 Output voltage Output wattage Series name File Name:HEP-600-SPEC 2015-01-15600W Single Output Switching Power Supply HEP-600 se rie s SPECIFICATION MODEL HEP-600-12 HEP-600-15 HEP-600-20 HEP-600-24 HEP-600-30 HEP-600-36 HEP-600-42 HEP-600-48 HEP-600-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V RATED CURRENT 40A 36A 28A 25A 20A 16.7A 14.3A 12.5A 11.2A RATED POWER 480W 540W 560W 600W 600W 601.2W 600.6W 600W 604.8W 250mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 350mVp-p VOLTAGE ADJ. RANGE 10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V Can be adjusted by internal potentiometer OUTPUT CURRENT ADJ. RANGE 8.3 ~ 16.7A 7.1 ~ 14.3A 20 ~ 40A 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A 6.2 ~ 12.5A 5.6 ~ 11.2A VOLTAGE TOLERANCE Note.3 3.0% 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.5 500ms, 80ms at full load 230VAC /115VAC HOLD UP TIME (Typ.) 15ms at full load 230VAC /115VAC VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 373VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC at full load INPUT EFFICIENCY (Typ.) 93% 94% 95% 95.5% 95.5% 96% 96% 96% 95% AC CURRENT (Typ.) 7A / 115VAC 3.3A / 230VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=1000 s measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 240VAC 105 ~ 125% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V 52.5 ~ 56.5V 59 ~ 63V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Power on :H >2 ~ 5V or Open circuit Power off : Lo <0 ~ 0.5V or Short circuit REMOTE ON/OFF CONTROL FUNCTION 5V STANDBY 5VSB : 5V 0.5A tolerance 5%, ripple : 100mVp-p(max.) -40 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 60 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH (Note.6) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A EMC IMMUNITY MTBF 76.9K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 280*144*48.5mm (L*W*H) 3.9Kg 4pcs/16.6Kg/0.9CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Refer to warranty statement. File Name:HEP-600-SPEC 2015-01-15