IDLC-25-1050 Mean Well

25W Constant Current Mode LED Driver IDLC-25 series ./, ./, ./, % & ( %) * + , - ,. ./,* 1, ,. 4 5 4 6* 7 - * ( * 8 9: : 7 5 4 ,. < : : + 7 0 - 1 12 1( *% 0 3 ( 5( 6, ( 6 =% 3 A ( * + , 3 File Name:IDLC-25-SPEC 2017-06-1425W Constant Current Mode LED Driver IDLC-25 series SPECIFICATION MODEL IDLC-25 -350 IDLC-25 -500 IDLC-25 -700 IDLC-25 -1050 RATED CURRENT 350mA 500mA 700mA 1050mA RATED POWER 24.5W 25W 25.2W 25.2W 49 ~ 70V 35 ~ 50V 16.8 ~ 24V CONSTANT CURRENT REGION Note.2 25.2 ~ 36V 75V 63V 36V OPEN CIRCUIT VOLTAGE(max.) 100V OUTPUT 5.0% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 7.0% SETUP TIME Note.4 500ms / 230VAC 1200ms/115VAC AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6) 50mA for A-Type only 90 ~ 295VAC 127 ~ 417VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load70%/115VAC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION INPUT (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 82% 81.5% 81.5% 80% AC CURRENT 0.4A/115VAC 0.16A/230VAC 0.13A/277VAC INRUSH CURRENT (Typ.) COLD START 30A(twidth=100 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION <0.5W for Blank-Type, <1.2W for A-Type PROTECTION SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed Tcase=-20 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) WORKING TEMP. MAX. CASE TEMP. Tcase=+90 WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 45) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750,CSA C22.2 NO.250.13-12 ENEC EN61347-1 & EN61347-2-13 independent, EN62384, SAFETY STANDARDS GB19510.1,GB19510.14 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( load70%) EN61000-3-3,GB17743,GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV) MTBF 418.9Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 110*75*22mm(L*W*H) PACKING 0.196Kg 63pcs / 13.348Kg / 0.88CUFT ( * > - 6* : 7 NOTE ,0 6 =/ A>,3 > ./, =>,B./ - , 7 C3 * A*0* /0 3 D E . > 1> * + , ) 7 , = :, = % 6 :6 % F 7 7 < 3 /= 7 7 : < < /= , File Name:IDLC-25-SPEC 2017-06-14