65W PWM Output LED Driver IDPV-65 series %& ( ) * +,-. / 0( 1 ) 2 3 / ( ( 14 5 6 7 (8. 8. 5 9 - (8. :,3 . 5 < 3 8, - 0 ,=> > < (3, A, < - (8. > > 6 < - / 393A9789A:98, 1 ) ) * 0 3 /, , , 1 0 A 3 5 6 0 File Name:IDPV-65-SPEC 2017-06-3065W PWM Output LED Driver IDPV-65 series SPECIFICATION MODEL IDPV-65 -12 IDPV-65 -24 IDPV-65 -36 IDPV-65 -48 IDPV-65 -60 36V DC VOLTAGE 12V 24V 48V 60V 4.2A 2.4A 1.8A 1.35A 1.08A RATED CURRENT 50.4W 57.6W 64.8W 64.8W 64.8W RATED POWER 0~100% DIMMING RANGE OUTPUT VOLTAGE TOLERANCE 10% PWM FREQUENCY (Typ.) 1KHz(20%) SETUP TIME Note.3 500ms / 230VAC AUXILIARY DC OUTPUT Note.4 Nominal 12V(deviation 11.4~12.6) 50mA for A-Type only 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/230VAC load 75%/277VAC) INPUT TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 85% 87% 88% 89% 90% AC CURRENT (Typ.) 0.4A/230VAC 0.3A/277VAC INRUSH CURRENT(Typ.) COLD START 30A(twidth=270 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC <0.5W for Blank-Type, <1.2W for A-Type NO LOAD POWER CONSUMPTION Shut down O/P voltage, re-power on to recovery SHORT CIRCUIT 105 ~ 115% PROTECTION OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. Ta=-20 ~ +40 (Please refer to OUTPUT LOAD vs TEMPERATURE section) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 40) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750,CSA C22.2 NO.250.13-12 ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( load60%) EN61000-3-3,GB17743,GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV) MTBF 398.7K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 130*67.5*22mm (L*W*H) 0.15Kg 81pcs/13Kg/ 1.46CUFT PACKING -5 *B 37, 5 > 3. < - NOTE 3- ( < - C 5 %5 5 D - 7- - B*9B)) - A- 5 6 4 < / > (1 / > (1- .- < < - < < > - File Name:IDPV-65-SPEC 2017-06-30