500W True Sine Wave DC-AC Inverter with MPPT Solar Charger ISI-501 series Users Manual Input AC Output TPTC004 IEC62368-1 %& ) . (( ) )* ++% . 7 , ( , )* - : ) ) * ) - ) ( ) . ) / - / / / / 0 * / - 1 2 3.. ) 4 3.. (( ) )* 5+% * & 1 1 66 ) 1 7 * * ) ) 89 - ) ( - 7 * ) ) * * * 0 012 / 0 - 3.. ) ( ) / ) ) ) ) * ( * ) ( 7 - 0 012 * ( , )* - - 7 ( * - * ) - 7* - ) - ) ) 4 0 012 ) - 2 ) *4 22 ( > ) - 4 - ( 1)*) ) 3.. ) 4 ) - ) ) - ) ) ) ) ) :.9 89 :.9 89 :.9 89 < ) ) :.9 89 6 :.9 6 89 = = :.9 89 =+ =+ File Name:ISI-501-SPEC 2021-08-20500W True Sine Wave DC-AC Inverter with MPPT Solar Charger ISI-501 series AC Output Receptacles(Optional) Receptacle type TYPE-A TYPE-B TYPE-C TYPE-D TYPE-F TYPE-U Standard Standard Optional Optional Optional Optional Country USA EUROPE AUSTRALIA U.K GFCI (60Hz) UNIVERSAL Certificate None SPECIFICATION MODEL ISI-501-112 ISI-501-124 ISI-501-148 ISI-501-212 ISI-501-224 ISI-501-248 RATED POWER 450W 500W 450W 500W MAXIMUM OUTPUT POWER (Typ.) 550W for 60 sec. / surge power 1000W for 30 cycles (112, 212 models : 495W for 60 sec. / surge power 900W for 30 cycles) Factory setting set at 110VAC Factory setting set at 230VAC AC VOLTAGE 100 / 110 / 115 / 120VAC selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W OUTPUT Factory setting set at 110VAC Factory setting set at 230VAC FREQUENCY Note.9 600.1Hz 50/60Hz selectable by setting button S.W 500.1Hz 50/60Hz selectable by setting button S.W WAVEFORM Note.1 True sine wave (THD<3%) AC REGULATION (Typ.) 3% FRONT PANEL INDICATOR Fault and operation status, Charger status, Battery capacity INVERTER BAT. VOLTAGE 12V 24V 48V 12V 24V 48V SECTION VOLTAGE RANGE Note.3,5 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC DC CURRENT (Typ.) Note.7 50A 30A 15A 50A 30A 15A INPUT NO LOAD CURRENT DRAW (Typ.) 1.25A 0.63A 0.32A 1.25A 0.63A 0.32A OFF MODE CURRENT DRAW (Typ.) 1mA EFFICIENCY (Typ.) Note.2 85% 87% 87% 86% 88% 88% OVER TEMPERATURE Shut down o/p voltage, re-power on to recover OUTPUT SHORT Shut down o/p voltage, re-power on to recover OUTPUT 110% load for 60 sec. PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover CHARGER CURRENT (Typ.) 30A 17A 8.5A 30A 17A 8.5A BATTERY TYPE Open & sealed Lead Acid FUSE 40A*2 40A*1 20A*1 40A*2 40A*1 20A*2 BATTERY SECTION 11.3V 22.5V 45V 11.3V 22.5V 45V BAT. LOW ALARM Note.3 BAT. LOW SHUTDOWN Note.3 10.5V 21V 42V 10.5V 21V 42V REVERSE POLARITY By internal fuse open MPPT CHARGER EFFICIENCY (Typ.) 98% OPEN CIRCUIT VOLTAGE RANGE 35 ~ 50V 45 ~ 90V 90 ~ 160V 35 ~ 50V 45 ~ 90V 90 ~ 160V MPPT / SOLAR MPPT RANGE 25 ~ 50V 35 ~ 90V 70 ~ 160V 25 ~ 50V 35 ~ 90V 70 ~ 160V SECTION SOLAR INPUT CURRENT (Typ.) 11A 7A 4.5A 11A 7A 4.5A 500W SOLAR INPUT POWER (Typ.) WORKING TEMP. Note.4 -20 ~ +40 100% load 60 50% load WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT o -30 ~ +70 / -22 ~ +158 F, 10 ~ 95% RH non-condensing STORAGE TEMP., HUMIDITY VIBRATION 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC62368-1 CB, EAC TP TC 004 approved Meet BS EN/EN62368-1 GENERAL Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC WITHSTAND VOLTAGE SAFETY SECTION & Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE EMC EMC EMISSION Compliance to FCC part 15 class B, EAC TP TC 020 Compliance to BS EN/EN55032 class B, EAC TP TC 020 EMC IMMUNITY Compliance to EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,8, EAC TP TC 020 MTBF 57.8K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 205*158*67mm (L*W*H) 2.35Kg 6pcs/15.1Kg/1.55CUFT PACKING - 7* - 4 - 4 > 42 9(( ) )* - 7* 2 4 - 4 > 42 ) ( ) 7* - / 2 =/ = =+/ =+ NOTE = - ) ) * ( ) - 7* ) 2 0 - ) ) * ( ) - 7* ) > ) ( - 7 - - -4 2 ( 7 - ( ) * ) - 7* 2 4 - 4 = 4=+ + 7 - ( 2/ ( - - ( 2 / ( - ( - >2 ( & 5 * 6 ( >A * File Name:ISI-501-SPEC 2021-08-20