3200W Power Supply with Single Output NSP-3200 series Users Manual Front 9 61% 3 :7. : 0: 4 :1 3 : <:0: 4 1: Back Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 UL62368-1 BS EN/EN62368-1 TPTC004 IEC62368-1 / %& ( ) * * * )+,- . % / 5) 6177 6 189 * / / : / 6 / 6.9* 7 1< 2 / + , = 5) 6177 > = 5 = > / = 01 2* 324 / ) File Name:NSP-3200-SPEC 2022-01-26 Preliminary3200W Power Supply with Single Output NSP-3200 series SPECIFICATION MODEL NSP-3200-24 NSP-3200-48 DC VOLTAGE 24V 48V RATED CURRENT 133A 67A CURRENT RANGE 0 ~ 133A 0 ~ 67A RATED POWER 3192W 3216W RIPPLE & NOISE (max.) Note.2,3 300mVp-p 480mVp-p OUTPUT VOLTAGE ADJ. RANGE 23.5 ~ 30V 47.5 ~ 58.8V VOLTAGE TOLERANCE Note.4 1.0% 1.0% LINE REGULATION 0.5% 0.5% LOAD REGULATION 0.5% 0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms / 230VAC at 70% load 8ms / 230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC at full load EFFICIENCY (Typ.) Note.6 93.5% 94.5% INPUT 17A/230VAC AC CURRENT (Typ.) Note.5 INRUSH CURRENT (Typ.) COLD START 55A/230VAC LEAKAGE CURRENT <2mA / 230VAC 105 ~ 115% rated output power OVERLOAD Protection type : Constant current limiting, shut down O/P voltage 5 sec. after O/P voltage is down low, re-power on to recover 31.5 ~ 37.5V 63 ~ 75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down OUTPUT VOLTAGE Adjustment of output voltage is allowable to 50 ~ 125% of nominal output voltage PROGRAMMABLE(PV) Please refer to the Function Manual in following pages By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual in following pages REMOTE ON-OFF CONTROL FUNCTION Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual in following pages REMOTE SENSE 12V 0.8A, tolerance10%, ripple 450mVp-p AUXILIARY POWER ALARM SIGNAL Isolated TTL signal output for T-Alarm and DC-OK. Please refer to the Function Manual in following pages WORKING TEMP. -20 ~ +70 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL62368-1, CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted BS EN/EN55032 (CISPR32) Class B EMC EMISSION Radiated BS EN/EN55032 (CISPR32) Class A Harmonic Current BS EN/EN61000-3-2 ----- Voltage Flicker BS EN/EN61000-3-3 ----- SAFETY & BS EN/EN55024, BS EN/EN61000-6-2, design refer to SEMI F47 EMC (Note 8) Parameter Standard Test Level / Note ESD BS EN/EN61000-4-2 Level 3, 8KV air Level 2, 4KV contact Radiated BS EN/EN61000-4-3 Level 3 EFT / Burst BS EN/EN61000-4-4 Level 3 EMC IMMUNITY Surge BS EN/EN61000-6-2 2KV/Line-Line 4KV/Line-Earth Conducted BS EN/EN61000-4-6 Level 3 Magnetic Field BS EN/EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% interruptions 250 periods MTBF K hrs min. Telcordia SR-332 (Bellcore) K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 325.8*107*41mm (L*W*H) Kg PACKING : 5 1672 = 1% NOTE 1 A B 17, C / :1D / / / 7 : B . 6 ) + - / E %& ( = % / E < .%& . - 2 F 2 = = 2 3 / / / +, > <77 77 / : E +, / +, = G+,- / H 0