200W Constant Voltage PWM Output KNX LED Driver PWM-200KN series Users Manual 05 TT PP S XX . % ( ) File Name:PWM-200KN-SPEC 2021-09-17200W PWM Output KNX LED Driver PWM-200KN series SPECIFICATION MODEL PWM-200-12 PWM-200-24 PWM-200-36 PWM-200-48 DC VOLTAGE 12V 24V 36V 48V RATED CURRENT 15A 8.3A 5.55A 4.17A RATED POWER 180W 199.2W 199.8W 200.1W DIMMING RANGE 0 ~ 100% OUTPUT PWM FREQUENCY (Typ.) 200~4000Hz user changable via ETS SETUP, RISE TIME Note.2 500ms, 80ms/230VAC, 1200ms, 80ms/115VAC HOLD UP TIME (Typ.) 10ms/230VAC or 115VAC 100 ~ 305VAC 142 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD<20%( load60%/115VAC, 230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 92% 93% 94% 94% INPUT AC CURRENT (Typ.) 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC INRUSH CURRENT (Typ.) COLD START 65A(twidth=550 s measured at 50% Ipeak) at 230V AC Per NEMA 410 MAX. NO. of PSUs on 16A 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC STANDBY standby power consumption<0.5W when dimming off POWER CONSUMPTION 108 ~ 135% rated output power OVERLOAD Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed Shut down o/p voltage, re-power on to recover SHORT CIRCUIT 13 ~ 18V 27 ~ 34V 41 ~ 49V 53 ~ 65V PROTECTION OVER VOLTAGE Shut down o/p voltage, re-power on to recover after fault condition is removed Shut down o/p voltage, re-power on to recover after fault condition is removed OVER TEMPERATURE WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) Tcase=+85 MAX. CASE TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750( type HL ), CSA C22.2 No. 250.13-12 ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384 SAFETY STANDARDS Note.5 independent, EAC TP TC 004,GB19510.1,GB19510.14 approved Design refer to BS EN/EN60335-1, According to BS EN/EN61347-2-13 appendix J suitable for emergency installations. KNX STANDARDS Certified protocol WITHSTAND VOLTAGE I/P-O/P: 3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH EMC Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C ( load 60%) BS EN/EN61000-3-3, EMC EMISSION Note.6 GB17743 and GB17625.1,EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11 BS EN/EN61547, light industry level (surge immunity, EMC IMMUNITY Line-Line 2KV),EAC TP TC 020 MTBF 553.6 K hrs min. Telcordia SR-332 (Bellcore) 170 K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 195*68*39.5mm (L*W*H) 1.03Kg 12pcs/13.4Kg/0.71CUFT PACKING NOTE ,