500W Single Output with PFC Function RSP-500 series Bauar t gep r u f t S i c h e r h e i t e g e l m a ge o d o s b e w a c g w w w . t u v . c o m ID 2000000000 AS/NZS62368-1 UL62368-1 BS EN/EN62368-1 GB4943.1 TPTC004 IEC62368-1 CNS14336-1 File Name:RSP-500-SPEC 2021-06-07500W Single Output with PFC Function RSP-500 series SPECIFICATION MODEL RSP-500-3.3 RSP-500-4 RSP-500-5 RSP-500-12 RSP-500-15 RSP-500-24 RSP-500-27 RSP-500-48 DC VOLTAGE 3.3V 4V 5V 12V 15V 24V 27V 48V RATED CURRENT 90A 90A 90A 41.7A 33.4A 21A 18.6A 10.5A CURRENT RANGE 0 ~ 90A 0 ~ 90A 0 ~ 90A 0 ~ 41.7A 0 ~ 33.4A 0 ~ 21A 0 ~ 18.6A 0 ~ 10.5A RATED POWER 297W 360W 450W 500.4W 501W 504W 502.2W 504W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.8 ~ 3.6V 3.6 ~ 4.3V 4.5 ~ 5.5V 10 ~ 13.2V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 30V 41 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 80ms/230VAC 3000ms, 80ms/115VAC at full load HOLD UP TIME (Typ.) 18ms/230VAC 14ms/115VAC at full load VOLTAGE RANGE Note.4 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 81% 83% 84% 88% 88% 89% 89.5% 90.5% AC CURRENT (Typ.) 4.2A/115VAC 2.1 A/230VAC 5.3A/115VAC 2.65 A/230VAC INRUSH CURRENT (Typ.) 20A/115VAC 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 130% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.8 ~ 4.5V 4.5 ~ 5.3V 5.75 ~ 6.75V 13.8 ~ 16.2V 18.8 ~ 21.8V 27.6 ~ 32.4V 32.9 ~ 38.3V 58.4 ~ 68V OVER VOLTAGE PROTECTION Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down POWER ON:open or 0~0.8VDC between RC+(Pin 4)&RC-(Pin3) on CN100 REMOTE CONTROL POWER OFF: 4~10VDC between RC+(Pin 4)&RC-(Pin3) on CN100 FUNCTION Compensate voltage drop on the load wiring up to 0.3V REMOTE SENSE RTH25010 Fan on RTH24010 Fan off (Fan always on for 3.3~5V,Fan ON/OFF control for 12~48V) FAN CONTROL (Typ.) WORKING TEMP. -30 ~ +70 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +85, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 , CCC GB4943.1 , BSMI CNS14336-1approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note.4) EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020,GB/T 9254, CNS13438 Class B EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2, criteria A, EAC TP TC 020 MTBF 187.7K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 230*127*40.5mm (L*W*H) 1.3Kg 9pcs/12.7Kg/0.7CUFT PACKING NOTE (as available on