200W Single Output Switching Power Supply SE-200 series 5 - ( & . - 6 7 / 7 / / ( 7 / ( / 8 / ( 9 * ( : * 2 4 & 5 < & ( = > % 2 & ( & SPECIFICATION MODEL SE-200-3.3 SE-200-5 SE-200-36 SE-200-48 SE-200-7.5 SE-200-12 SE-200-15 SE-200-24 SE-200-27 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 27V 36V 48V RATED CURRENT 40A 40A 27A 17A 14A 8.8A 7.8A 5.9A 4.4A 0 ~ 27A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 17A 0 ~ 14A 0 ~ 8.8A 0 ~ 7.8A 0 ~ 5.9A 0 ~ 4.4A RATED POWER 132W 200W 202.5W 204W 210W 211.2W 210.6W 212.4W 211.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p 240mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.97 ~ 3.7V 4.5 ~ 5.6V 6 ~ 9V 10 ~ 13.5V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 32V 32 ~ 40V 41 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% LOAD REGULATION 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load 20ms/230VAC 16ms/115VAC at full load HOLD UP TIME VOLTAGE RANGE Note.4 90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 75% 82% 85% 85% 87% 88% 89% 89% 79% INPUT AC CURRENT 4.5A/115VAC 2.5A/230VAC INRUSH CURRENT (max.) 40A/115VAC 55A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC 105 ~ 150% rated output power OVER LOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.8 ~ 4.9V 5.75 ~ 7.0V 9.4 ~ 10.9V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V 41.4 ~ 46.8V 57.6 ~ 67.2V OVER VOLTAGE PROTECTION Protection type :Shut down O/P voltage, re-power on to recover 955(3.3V) 1005(5V) 905(7.5V) 855(12~24V) 805(27~36V) 755(48V) (TSW1) Detect on case OVER TEMPERATURE Protection type : Shut down O/P voltage, recovers automatically after temperature goes down -20 ~ +50 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved SAFETY STANDARDS SAFETY WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25/ 70% RH 271.9K hrs min. MIL-HDBK-217F (25) MTBF OTHERS DIMENSION 215*115*50mm (L*W*H) PACKING 0.93Kg 12pcs/12Kg/0.92CUFT NOTE % & ( ) & *& & +, - ( ( + . / / ( & 0 123 0 ( / / ( & 0 1 3 0 ( 4 / ( / ( File Name:SE-200-SPEC 2013-08-19200W Single Output Switching Power Supply SE-200 series Mechanical Specification Case No. 912E Unit:mm 27.5 177.5 32.5 150 117.5 LED +V ADJ. 9 8 7 6 5 4-M4 L=5mm 4 3 5-M3 L=3mm 2 1 Terminal pin number assignment : 15 215 Pin No. Assignment Pin No. Assignment 1 AC/L 4~6 DC OUTPUT -V 32.5 150 2 AC/N 7~9 DC OUTPUT +V 3 FG 12 max. 6-M4 L=6mm Block Diagram fosc : 90KHz 230 115 ACTIVE RECTIFIERS RECTIFIERS POWER +V EMI INRUSH I/P & & CURRENT SWITCHING FILTER -V FILTER FILTER LIMITING DETECTION CIRCUIT FG PWM O.L.P. CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 7.5~48V 100 100 90 15 ~ 48V 80 80 3.3 ~ 12V 75 3.3~5V 70 60 50 60 40 50 20 40 -20 0102030405060(HORIZONTAL) 90 100 132 180 190 264 AMBIENT TEMPERATURE () File Name:SE-200-SPEC 2013-08-19 LOAD (%) 135 8 9.5 LOAD (%) 25 C L 16 50 32.5 50 50.5 10 95 115