75W Single Output with PFC Function SP-75 series SPECIFICATION MODEL SP-75-3.3 SP-75-5 SP-75-7.5 SP-75-12 SP-75-13.5 SP-75-15 SP-75-24 SP-75-27 SP-75-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 15A 15A 10A 6.3A 5.6A 5A 3.2A 2.8A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 5A 0 ~ 3.2A 0 ~ 2.8A 0 ~ 1.6A RATED POWER 49.5W 75W 75W 75.6W 75.6W 75W 76.8W 75.6W 76.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 100mVp-p OUTPUT VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 800ms, 60ms at full load 36ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC 0.96/115VAC at full load INPUT EFFICIENCY (Typ.) 70% 76% 79% 81% 82% 82% 83% 83% 83% 1.3A/115VAC 0.7A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) COLD START 45A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.13V 13.8 ~ 16.2V 15.53 ~ 18.23V 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 55.2 ~ 64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover FUNCTION REMOTE CONTROL(OPTION) CN3:4 ~ 10VDC POWER OFF, <0 ~ 0.8VDC POWER ON -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT -20 ~ +85, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3 (Note 4) EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204, EN55024, light industry level, criteria A MTBF 208.8K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 179*97*33mm (L*W*H) 0.58Kg 20pcs/12Kg/0.64CUFT PACKING NOTE File Name:SP-75-SPEC 2017-07-1475W Single Output with PFC Function SP-75 series Mechanical Specification Case No. 920A Unit:mm 60 65 1 CN3 2 ADJ. LED 1 2 3 2-M4 L=4mm 4 5 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 DC OUTPUT +V 4 AC/N 2 DC OUTPUT -V 5 AC/L 15 3 FG Remote ON/OFF(CN3): Molex 5046-02 or equivalent(optional) 11 max. Pin No. Assignment Mating Housing Terminal 1 RC- Molex 5051 Molex 2759 or equivalent or equivalent 2 RC+ 25 117 6-M4 L=6mm 179 Block Diagram PFC fosc : 67KHz PWM fosc : 134KHz EMI FILTER RECTIFIERS PFC POWER +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER CONSTANT CURRENT LIMITING & FG DETECTION O.L.P. PWM & PFC CIRCUIT CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage (For 3.3V,5V,7.5V type) With 18CFM 100 100 Forced AIR (1) 90 80 80 70 60 (1)For 12V output or above 60 40 50 20 40 -10 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 115 135 155 230 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:SP-75-SPEC 2017-07-14 33 9.5 8 LOAD (%) 16 18 8 49.5 99 17 LOAD (%) 32.5 119