MLX90363EGO-ABB-000-RE Melexis

MLX90363 Magnetometer IC with High Speed Serial Interface Datasheet Features and Benefits Description Tria is Magnetometer (B , B , B ) The MLX90363 is a monolithic magnetic sensor IC X Y Z featuring the Tria is Hall technology. On Chip Signal Processing for Robust Position Conventional planar Hall technology is only Sensing sensitive to the flux density applied orthogonally High Speed Serial Interface (SPI compatible to the IC surface. The Tria is Hall sensor is also Full Duplex) sensitive to the flux density applied parallel to the Enhanced Self-Diagnostics Features IC surface. This is obtained through an Integrated Magneto-Concentrator (IMC) which is deposited 5V and 3V3 Application Compatible on the CMOS die. 14 bit Output Resolution 48 bit ID Number The MLX90363 is sensitive to three (B , B and B ) X Y Z Single Die SOIC-8 Package RoHS Compliant components of the flux density applied to the IC. Dual Die (Full Redundant) TSSOP-16 Package This allows the MLX90363 to sense any magnet moving in its surrounding and decode its position RoHS Compliant through an appropriate signal processing. Using its Serial Interface the MLX90363 can transmit a digital output (SP 64 bits per frame). The MLX90363 is intended for Embedded Position SOIC-8 TSSOP-16 Sensor applications (vs. Stand-Alone Remote Sensor) for which the output is directly provided to a microcontroller (Master) close to the Applications magnetometer IC MLX90363 (Slave). The SPI protocol confirms this intent. Absolute Contacless Position Sensor Steering Wheel Position Sensor The MLX90363 is using full duplex SPI protocol 3D Joystick Position Sensor and requires therefore the separated SPI signal lines: MOSI, MISO, /SS and SCLK. VDD VDEC 3V3 Regulator DSP MISO RAM EEPROM VX Output Stage Triaxis VY MOSI VZ 14 bit SPI Angle ADC G C SCLK 14 bit SPI XYZ SS ROM - Firmware VSS MUXMLX90363 Magnetometer IC with High Speed Serial Interface Datasheet 1. Ordering Information Product Code Temperature Code Package Code Option Code Packing Form Code MLX90363 E DC ABB-000 RE MLX90363 E GO ABB-000 RE MLX90363 K DC ABB-000 RE MLX90363 K GO ABB-000 RE MLX90363 L DC ABB-000 RE MLX90363 L GO ABB-000 RE Legend: Temperature Code: E: from -40 Deg.C to 85 Deg.C K: from -40 Deg.C to 125 Deg.C L: from -40 Deg.C to 150 Deg.C Package Code: DC for SOIC-8 package GO for TSSOP-16 package (dual die) Option Code: ABB-xxx: die version xxx-000: standard Packing Form: RE for Reel TU for Tube Ordering Example: MLX90363LGO-ABB-000-RE Table 1 - Legend REVISION 006 DEC 2016 Page 2 of 62