Quartz Crystal Surface Mount Crystals MJ series SMD type 5.0 x 3.2 x 0.8 mm Applications The entire package can be grounded via the top metal lid and the two bottom pads . Frequency tolerance as tight as +/-5ppm is available. General Specifications Paramenters Electrical Spec. Item / Type MJ series ( 5.0 * 3.2 * 0.8 mm ) 8.000 ~ 50.000 MHz , AT-cut , Fundamental Mode ( see Table 1 ) 40.000 ~ 200.000 MHz , AT-cut , 3rd overtone ( see Table 1 ) NOTE : Frequencies between 40 and 50 MHz can be either AT fundamental or AT 3rd overtone. Frequency Range & Crystal Cut Please add AF after the frequency on the part number for an AT-cut fundamental mode crystal and A3 for an AT-Cut 3rd overtone crystal. For example: MJ-40.000AF-20P. Load Capacitance Series or Parallel ( 8 to 32 pF ) resonance Drive Level 10 W typical ( 100 W max. ) Frequency Tolerance 5 ppm , 10 ppm , 20 ppm or 30 ppm at 25C Frequency Stability See Table 2 Aging F / F : 3 ppm / year ( max. ) Storage Temperature Range - 50C to 105C Table 1 Table 2 ESR ( Equivalent Series Resistance ) Frequency stability vs Operating temperature range Frequency Range Oscillator Mode E. S. R. Stability code Temp. (C) ppm 5 10 15 20 25 30 8.000 ~ 10.000 MHz AT-Cut , Fund. Mode 80 max X -10 to 60C 10.100 ~ 50.000 MHz AT-Cut , Fund. Mode 50 max Y -20 to 70C 40.000 ~ 200.000 MHz AT-Cut , 3rd Overtone 80 max -40 to 85C I : available : contact Mercury General Specifications ( Unit : mm ) Mercury www .mercury-crystal.com Taiwan : Tel (886)-2-2406-2779 / sales-tw mercury-crystal.com U.S.A: Tel: (1)-909-466-0427 / sales-us mercury-crystal.com China: Tel: (86)-512-5763-8100 / sales-cn mecxtal.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for mercury united manufacturer: Other Similar products are found below : H49-4.000-18-30/50/-40+85 3H53ET-20.000 H49-24.576-18-30/50/-40+85 X32-25.000-12-30/30/-40+85 HUS-10.000-18-30/50/-40+85 HUS-4.194304-18-30/50/-40+85 H49-11.0592-18-30/50/-40+85 MJ-25.000-12-30/30/-40+85 H49-27.000-18-30/50/-40+85 HUS- 12.000-18-30/50/-40+85 H49-14.31818-18-30/50/-40+85 H49-16.384-18-30/50/-40+85 3H32ET-10.000 3H53ET-40.000 3H32ET-20.000 H49-7.3728-18-30/50/-40+85 3SWOET-10.000 HUS-14.31818-18-30/50/-40+85 H49-24.000-18-30/50/-40+85 H49-25.000-18-30/50/-40+85 M49-24.576-18-30/50/-40+85 X21-26.000-12-30/30/-40+85 H49-9.8304-18-30/50/-40+85 HUS-7.3728-18-30/50/-40+85 X21- 20.000-12-30/30/-40+85 3H53ET-24.000 MP24G-12.000-18P-30/50/X/80R