CV-UK4 Metcal

Purpose-Built for Performance. Introducing the CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering stations have led the way with SmartHeat technology for 35 years. SmartHeat senses the thermal load and instantly delivers Power on Demand directly to the joint. The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. Currently, the industry standard relies on a visual inspection of the solder joint. Metcal has developed a better way Introducing Connection Validation.CV-5200 Series Specifications Connection Validation Soldering Station The intermetallic compound thickness is critical in CV System Configuration the formation of a solder joint. Connection Validation Part Number Description (CV) evaluates the quality of the solder joint by CV-5210 Solder System includes: calculating the intermetallic compound formation and CV-PS5200 Power Supply* CV-H1-AV Advanced hand-piece for CV with LED light* provides closed loop feedback to the operator. CV-CP1 Cartridge Removal Pad* CV provides feedback to the operator via the LED CV-W1AV TipSaver Workstand* Also Available *Can be ordered separately light ring integrated in the hand-piece. It takes the Upgrade Kit, includes CV Advanced Hand-piece and CV-UK1 risk associated with the variables involved in the Workstand soldering activity and removes the success and See our complete cartridge/tip selection at www.Metcal.com failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge Technical Specifications the quality of a solder joint by introducing an objective method of evaluating solder joint quality. CV-5200 Connection Validation Power Supply This systemic and objective approach provides 10 to 40C Ambient Operating Temp. repeatability and a measureable standard to the Max. Enclosure Temp. 55C soldering process. 100 240 VAC, grounded circuit Input Line Voltage Input Line Frequency 50/60 Hz Features and Benefits Rated Power Consumption 125W SmartHeat Power on Demand Technology 80W max. Output Power Patented Connection Validation IMC Formation Technology Output Frequency 13.56 MHz 2.8 color touchscreen with bold graphics Induction Heating Method Communications Port for process traceability Display 2.8 Color TFT LCD Display data and firmware graphics Resolution 320*240 RGB Integrated Net Power Meter and power graph With optional precise tip temperature display 2.8 Diagonal Size Patented Chip-in-Cartridge technology Active Area 43.20 x 57.60 mm Closed loop bi-directional communication Single Port Connections Stores and records cartridge attributes Communications USB Provides traceability information Power Supply Dim. w x d x h 121 x 130 x 235 Protects power supply from non-conforming (mm) cartridges Backwards compatible with MX series power Power Supply Weight (kg) 3.35 supplies Certification / Marking CE TUV Password protection <2mV Tip-to- Ground Potential Wide variety of cartridges available for Tip-to-Ground Resistance <2ohm most applications Idle Temperature Stability 1.1C in still air Power supply protected by 5-year warranty, longest in the industry Meets or exceeds IPC J-STD-001 Tip Temperature Accuracy Standard L=183cm (72 ), burn proof, ESD Hand-piece cable length safe Hand-piece connectors RF Connector F type power connector 6 pin DIN LED Power Connector 2 single port or dynamic dual Operation simultaneous Via USB port and appropriate LED equipped hand piece Tip temperature displayed Firmware upgrade software with compatible signals to operator when a on large color screen. computer and cables. good solder joint is formed.